Trang chủ Thiết Bị Đo Lường Điện Thiết bị đo hãng Compliance

Compliance HT-2800S Hipot Tester

Mã sản phẩm: HT-2800S |
Thương hiệu: Compliance

Giá bán: Liên hệ

Yêu Cầu Giá Tốt

Zalo/ Tell : 0984.843.683

Thông tin sản phẩm

Features

HT-2800S Hipot Tester, 0-2800Vdc 5mA, Adjustable Ground Continuity UL listed
High precision leakage current, duration and ground continuity settings.
Allows no load setup of leakage current and test dwell times.
Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
Leakage currents can be set from 1-5 mA DC in 0.1mA increments.
Dwell times can be set from 1-60 seconds in 1 second increments.
Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
Small and light. 9.25" wide x 4.75" high x 10" deep. 11 lbs. But rugged enough to test manufactured housing.
Ground continuity check is defeatable for testing two-wire products.
Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
J2 and J3 cords allow connection of pigtail power leads.
Simple test outcome judgement. Green lights mean pass - red lights mean fail. Failing tests sound a buzzer as well.
Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
Operation Instructions are printed on the rear panel for easy reference.
In-depth testing. Both true Arc Detection and Leakage Current circuits test the product to find problems.
RED lights and a buzzer leave no question if a failure has occurred.
Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).

Compliance HT-2800S Specification
Voltage Range	0-2800 DC
Leakage Current Set Point	1-5 mA DC
Input Voltage Requirements	117-127 V, 50 /60 Hz
Fuse Requirements	120 V, 2 A Slow Blow
Arc Detect	Independent High Frequency Circuit
Leakage Detect	Independent Low Frequency Circuit
Ground Continuity Set Point	0.08 Ω - 1.50 Ω, Defeatable
Ground Continuity Test Current	100 mA
Test Time Range	1 - 60 Seconds
Ramp Time Range	1 - 5 Seconds
Voltage Meter Accuracy	± 2 %
HV Shutdown by Ground Fail	< 7 mS
Duty Cycle	100%
Discharge Time	< 1.3 Sec VDC at open circuit
Transformer Power	< 500 VA
Pass/Fail Repeatability	± 3 %
Output Connector	NEMA plug
Display	4 digits LED display
Test Indicator Led indicators
Failure Indicator	Led indicators and buzzer
Programable	No
PLC Interface	Optional
TestLink (With GF-30AC)	Optional
Computer Control	No
Voltage Hold on failure	No
Top Mounted Handle Optional
Test Defeat	Ground Continuity
Autoreset on Pass Optional
Operation Temperature	15 - 40 °C
Relative Humidity Range	0 - 90 % Non-condensing
Dimensions	9.25" wide x 475" high x 10" deep
Weight	11 Lbs
Calibration	One year calibration Certificate
Test Cords	Return Lead, Power Cord
Test Cords	Ground Continuity Connector Tip
Test Cords	J2 and J3 Optional
Test Cords	Alligator Clip