Xe thử nghiệm cáp ngầm ETL-10 KEP

Mã sản phẩm: ETL-10 |
Thương hiệu: KEP

Giá bán: Liên hệ
Cable Test Van 10 kV

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Cable test van ETL-10 is a combination of testing equipment mounted in a van and designed to perform the following:

  • High-voltage testing with AC voltage of up to 50 kV;
  • High-voltage testing with DC voltage of up to 60 kV;
  • Burning the defective insulation of cables and its further aftreburing;
  • Determining the distance to the fault with OTDR RIF-7;
  • Finding cable faults using the induction method with the audio-frequency generatorGZCH-2500 and the receiver P-900;
  • Finding cable faults using acoustic method with the acoustic generator GAUV-32 and the receiver P-900.

The price of ETL-10 incudes the trainging of the Customer's personnel. ETL-10 manufacturing time is 30 days.


  • Technical Specifications

    General ETL-10 specifications:

    Characteristic Value
    Single-phase AC power supply voltage, V                      
    220±22 
    Power supply frequency, Hz
    50±2
    Consumed current, A, max
    50
    Net weight, kg, max 500
    Service personnel, people, min 2
    Lifespan, years, min 10

     

    High voltage tester BVI-60/50-M2 specifications:

    The unit is intended for testing the insulation of power cables and solid dielectric with the rectified voltage of up to 60 kV, as well as for testing solid dielectrics with sinusoidal voltage of up to 50 kV (RMS) at 50 Hz.

    Characteristic Value
    Maximum rectified voltage under continuous running duty, kV        
    60
    Maximum running current under rectified voltage, mA 50
    Maximum AC voltage (RMS), kV 50
    Maximum operating current under AC voltage (RMS), mA 
    50
    Dimensions, mm, max 430х380х570 
    Net weight, kg, max 85

     

    Burning unit BPR-25/8 specifications:

    The unit is intended for burning and afterburning the defective cable insulation with DC current.

    Characteristic Value
    Maximum idling output voltage, kV
    20
    Minimum idling output voltage, kV 1
    Number of burning levels
    4
    Maximum burning current in the short circuit mode, A, min
    6
    Maximum burning voltage in idle mode, V 500
    Maximum afterburning current in the short circuit mode, A, min          
    12
    Power consumption, kW, max 18
    Effective power consumption, kW, max
    8.5
    Operation duty, minutes
    20
    Dimensions, mm, max 430х620х500 
    Net weight, kg, max 90

     

    Acoustic generator GAUV-32 specifications:

    GAUV-32 is a capacitive charging device with a pulsed discharge and designed for finding the fault location of cable lines with the transfer resistance R>=500 Ohms using acoustic method and is used in conjunction with the acoustic receiver P-900. The generator consists of a control unit and a high voltage block.

    Characteristic Value
    Capacitance, μF 4 х 15
    Maximum output voltage by levels:
    - first level, kV
    8
    - second level, kV
    16
    - third level, kV 32
    Maximum discharge pulse energy on any level, J         
    1000
    Operation mode:
    - manual -
    - automatic with discharge pulse interval, s
    0,5; 1; 2; 3; 5 
    Dimensions, mm, max 440х580х550
    Net weight, kg, max
SẢN PHẨM CÙNG DANH MỤC