Wet bench magnetic particle detectors ER-26Y/ER-26YD EMIC Japan

Mã sản phẩm: ER-26Y/ER-26YD |
Thương hiệu: EMIC

Giá bán: Liên hệ

Yêu Cầu Giá Tốt

Thông tin sản phẩm
Feature:


Duovec magnetization allows the unit to improve inspection efficiency by doing longitudinal and circular inspection at the same time.

As the unit allows to set the each current level of direct contact and coil magnetization separately, inspection can be performed in balance with the most suitable current level to parts to be inspected.
The unit performs contacting heads, spraying particle, magnetizing and moving back heads automatically. And this automatic cycle improves inspection efficiency and lowers burden to operators.
Stainless suspension tank, air contact system, constant current control system are available as option. ER-26YD is equipped with demagnetizing system.


Model

ER-26Y

Power source(rating)

Single-phase AC200V 50/60 Hz Approx. 60A

Magnetizing output

Direct contact : DC3000A(1 PH HW Peak value)
Coil : DC2500A(1 PH HW Peak value)
Current adjust : SCR no contact step less
Duty cycle : 0-2 sec. variable 2 sec. excitation 30 sec. pause
Rated load : OD 25mm X 450mm by direct contact
Coil: 75mm2 X 4 turns 2 pcs of coil

Demagnetizing output

N/A

One cycle performance

Contacting heads-Spraying suspension-magnetization-release direct contact heads

Direct contact head

Mobile side : Max.distance 50-660 mm slid manually
Fixed side :  Press contact by air cylinder (50mm stroke)
Contact face, Quality : OD 78mm Copper net(plaited in whirl) Coil : Effective ID170mm
Dimensions : 1300W × 700D × 830H
Darkroom dimensions : 1500W ×1500D ×2200H

Model

ER-26YD

Power source(rating)

Three-phase AC200V 50/60 Hz Approx. 60A

Magnetizing output

Direct contact : AC3000A(Peak value)
Coil : AC2500A(Peak value)
Current adjust : SCR no contact step less
Duty cycle : 0-2 sec. variable 2 sec. excitation 30 sec. pause
Rated load : OD 25mm X 450mm by direct contact
Coil: 75mm2 X 4 turns 2 pcs of coil

Demagnetizing output

AC current attenuation 3000A-0A(direct contact)

One cycle performance

Contacting heads-Spraying suspension-magnetization-release direct contact heads

Direct contact head

Mobile side : Max.distance 50-660 mm slid manually
Fixed side :  Press contact by air cylinder (50mm stroke)
Contact face, Quality : OD 78mm Copper net(plaited in whirl) Coil : Effective ID170mm
Dimensions : 1300W × 700D × 830H
Darkroom dimensions : 1500W ×1500D ×2200H


SẢN PHẨM CÙNG DANH MỤC