Dual Channel Portable Ultrasonic Flaw Detector And Recorder
- Large Bright High Resolution Color Touch Screen
- Built-In Encoder Interface
- USB, LAN, VGA outputs
- Huge Data Storage Capability
- Longitudinal, Shear, Guided, and Surface Waves
- A-, B-, CB-, C-, D-, P-Scan and TOFD
- Corrosion Profiling and Flaw Imaging
- Up To 20m Length of One Line Scanning Record
- Playback A-Scans for Recorded Images
- Enhanced Signal Evaluation for Live and Frozen A-Scans
- Defect Sizing and Pattern Analysis
- Compliance with ASME and RBIM Procedures
ISONIC 2007 uniquely combines functionality and mobility of high performance portable digital single or dual channel ultrasonic flaw detector with recording, imaging, and data processing capabilities of smart computerized dual channel inspection system
ISONIC 2007 resolves a variety of ultrasonic inspection tasks:
- A-Scan-based inspection using conventional pulse echo, back echo attenuation, and through transmission techniques
- Single Channel Straight Line Scanning and Recording:
- Thickness Profile B-Scan imaging and recording is performed through continuous capturing of wall thickness readings along probe trace
- B-Scan cross-sectional imaging and recording of defects for longitudinal and shear wave inspection is performed through continuous measuring of echo amplitudes and reflectors coordinates along probe trace
- CB-Scan horizontal plane-view imaging and recording of defects for shear, surface, and guided wave inspection is performed through continuous measuring of echo amplitudes and reflectors coordinates along probe trace
- TOFD Inspection – RF B-Scan and D-Scan Imaging
For Single Channel Straight Line Scanning and Recording it may be used:
- Time-based mode (built-in real time clock)
- True-to-location mode (built-in incremental encoder interface)
- Dual Channel Straight Line Scanning and Recording:
- Thickness Profile B-Scan imaging and recording is performed through continuous capturing of wall thickness readings along probe trace
- CB-Scan horizontal plane-view imaging and recording of defects for shear, surface, and guided wave inspection is performed through continuous measuring of echo amplitudes and reflectors coordinates along probe trace
- TOFD Inspection – RF B-Scan and D-Scan Imaging
For Dual Channel Straight Line Scanning and Recording it may be used:
- True-to-location mode (built-in incremental encoder interface)
- XY-Scanning and Recording with C-Scan and B-Scan imaging is also possible if using optional USB interface to multi-axis mechanical encoder and appropriate software package
For all types of Straight Line Scanning and XY-Scanning records A-Scans are captured for each probe position along probe trace and may be played back and evaluated off-line at postprocessing stage. This unique feature makes it possible off-line defect characterization through echo-dynamic pattern analysis
Thickness Profile B-Scan Data recorded during Straight Line Scanning is presented in the format compatible with various Risk Based Inspection and Maintenance procedures
ISONIC 2007 has practically unlimited capacity for storing of:
- Single A-Scans accompanied with corresponding instrument settings
- Ultrasonic signal spectrum graphs (FFT) accompanied with corresponding RF A-Scans and instrument settings
- Various A-Scans sequence records along with corresponding Thickness Profiles, B-Scans, CB-Scans or TOFD Maps depending on mode of operation selected; each record is accompanied with corresponding instrument settings
ISONIC 2007 complies with requirements of National and International Codes:
- ASME Section I – Rules for Construction of Power Boilers
- ASME Section VIII, Division 1 – Rules for Construction of Pressure Vessels
- ASME Section VIII, Division 2 – Rules for Construction of Pressure Vessels. Alternative Rules
- ASME Section VIII Article KE-3 – Examination of Welds and Acceptance Criteria
- ASME Code Case 2235 Rev 9 – Use of Ultrasonic Examination in Lieu of Radiography
- Non-Destructive Examination of Welded Joints – Ultrasonic Examination of Welded Joints. – British and European Standard BS EN 1714:1998
- Non-Destructive Examination of Welds – Ultrasonic Examination – Characterization of Indications in Welds. – British and European Standard BS EN 1713:1998
- Calibration and Setting-Up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for the Detection, Location and Sizing of Flaws. – British Standard BS 7706:1993
- WI 00121377, Welding – Use Of Time-Of-Flight Diffraction Technique (TOFD) For Testing Of Welds. – European Committee for Standardization – Document # CEN/TC 121/SC 5/WG 2 N 146, issued Feb, 12, 2003
- Non-Destructive Testing – Ultrasonic Examination – Part 5: Characterization and Sizing of Discontinuities. – British and European Standard BS EN 583-5:2001
- Non-Destructive Testing – Ultrasonic Examination – Part 2: Sensitivity and Range Setting. – British and European Standard BS EN 583-2:2001
- Manufacture and Testing of Pressure Vessels. Non-Destructive Testing of Welded Joints. Minimum Requirement for Non-Destructive Testing Methods – Appendix 1 to AD-Merkblatt HP5/3 (Germany).– Edition July 1989
|