- The pneumatic pressure comparison test pump LR-Cal LSP 100-P is used for generating pressure and vacuum for the testing, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparison measurements. These pressure and vacuum tests can be carried out in laboratories, workshops or on site at the set measuring point
- When the device under test and a reference measuring instrument with an adequate accuracy are connected to the same pressure comparator LR-Cal LSP 100-P, the same pressure will act on both measuring instruments after actuating the pump. A calibration or an adjustment can be carried out by comparing the two measure values at any pressure or vacuum value.
- In order to enable an accurate generation of the measuring points, the pressure comparison pump LR-Cal LSP 100-P is provided with a fine adjustment valve with a sensitivity of ±0.1 mbar.
- This manual pressure pump uses ambient air as medium. Easy to use, no external pressure or vacuum source needed.
Thông số kỹ thuật
- Pressure generation: 0 to 100 bar = 0 to 1450 psi, switchable to
- Vacuum generation: 0 to -0,95 bar = 0 to -28 inHg
- Pressure ports: 2 pressure ports, M20x1.5 female rotating, equipped with threaded adapters to 1/2" BSP female, incl. O-rings for tighness without tools
- Distance of pressure ports: 220 mm
- Pressure fine adjustment: Fine adjustment valve, sensitivity ±0.1 mbar
- Dimension: approx. 450 x 262 x 170 mm
- Weight: approx. 5.6 kg
- Order-Code: LSP-100-P