- The pressure test pump LR-Cal LPP 1000 is used to generate pressure for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements. These pressure tests may be carried out in laboratories, workshop or on site at the measuring point.
- If the instrument to be tested and a sufficiently accurate reference measuring instrument are connected up to the test pump, the same pressure is applied to the two measuring instruments when the pressure test pump LR-Cal LPP 1000 is operated. By comparing the two measure valuses at random pressure values, the accuracy can be verified or the instrument under test can be adjusted.
- Despite its compact dimensions, the pressure test pump LR-Cal LPP 1000 is easy to operate and allows for exact generation of the required test pressures The LR-Cal LPP 1000 is fitted with a fine adjustment valve for a precise adjustment of pressures.
- The reference instrument is screwd directly on the top of the pump and the unit under test is connected by means of the connection tube incorporating an adapter 1/4" BSP female thread (freely rotating), contained in the scope of delivery.
Thông số kỹ thuật
- Pressure generation: 0 to 1,000 bar = 0 to 14,500 psi
- Pressure ports (standard version):
+ For reference instrument (on the top of the pump): 1/2" BSP female (freely rotating), with integr. O-ring
+ For test item (at the test hose): 1/4" BSP female (freely rotating), with integr. O-ring
- Materials: Aluminium, brass, ABS, Plexiglas, NBR
- Priming pressure: Hand lever
- High pressure: Switch-over knob, reduced lever stroke
- Pressure fine adjustment: Fine volume adjuster (with large volume)
- Operating media: Mineral oil based hydraulic fluid or destilled water, like used for flat irons (e.g. from local super market)
- Fluid reservoir: Volume > 200 cm³, can be filled during stroking
- Dimensions: approx. 270 x 160 x 120 mm (without test hose)
- Weight: approx. 1.3 kg (without test hose)
- Order-Code: LPP-1000