Thiết bị đo lưu lượng HM P Kem Kuppers

The HM P (P for Pelton wheel) series turbine flowmeter works according to the Pelton wheel turbine principle and is used to measure continuous and discontinuous volume flows. It is used primarily for cost-effective flow rate measurement in heating and cooling circuits. Even heavily contaminated media at very high temperatures can be measured thanks to the special design and bearing concept.

Measuring Ranges: 1.0 up to 280 l/min
Repeatability: ±0.5 % (under the same conditions)
Linearity: ±2.5 % of actual flow (viscosity 1 mm²/s)
Viscosity Range: 0.8 up to 10 mm²/s
Materials:
Housing: as per DIN 1.4305 (AISI 303)
Wheels: as per DIN 1.4122
Bearing: Ceramics
Seals: FKM, graphite
Pressure: up to 20 bar
Medium Temperature: -4 °F up to +662 °F (-20 °C to +350 °C)