- Ranges from 0...0.5 Nm to 0...2000 Nm
- You can select from 9 torque measuring units
- Accuracy ±0.20% FS
- Incl. ACCREDIA (DAkkS) certificate from 1/10 of range for clockwise direction, Total uncertainty <=1% FS
- Optional additional ACCREDIA (DAkkS) Zertifikat for counter-clockwise direction
- PEAK function for exact detection of the "snap-point" (clockwise and counter-clockwise direction)
- Programmiable "First PEAK" Funktion, makes calibration more easy
- Optional: with data logging functionality
Thông số kỹ thuật
- Total uncertainty acc. EURAMET cg-14: 1% (from 10% to 100% of the range)
- Linearity and hysteresis: <=±0.20% FS
- Internal resolution: 24 bit
- Normal mode measuring rate: 10 measurements per second
- PEAK mode measuring rate: 4800 measurements per second
- Reference temperature: 23°C
- Working temperature range: 0...50°C
- Storage temperature range: -10...+60°C
- Temperature influence per 10°C: on zero <=±0.015%; on sensitivity <=±0.005%
- LC Display: Figurs height 16 mm; Backlight (blue) 1...60 s programmable additional bargraph indication
- Programmiable resolution: 1, 2, 5, 10
- Programmable digital filter from 0 to 10 (in normal mode; not applicable in PEAK mode)
- ZERO function: working up to 100% FS
- PEAK function: Clockwise direction and Counter-clockwise direction
- Programmable "First PEAK" function Treshold value programmable 1...99% FS
- Programmable AUTO PEAK RESET function: Reset of PEAK value after programmable time
- Programmable AUTO POWER OFF function: From 1 to 30 Minuten (if measured value remains unchanged)
- KEY BLOCK function: Avoids parameter changements by unauthorised personnel
- ring units (torque): kNm, Nm, Ncm, dNm, kgf m, ozf ft, lbf ft, ozf inch, lbf inch
- Communication interface: USB 2.0
- USB continuous data transmission : 4800 values per second (in PEAK mode)
- Data transmission: on demand
- Maximale USB cable length: 5 meters
- Power supply: Built-in Li-Ion chargeable battery. Size 14500, 3.6 V
- Battery charging: via USB
- Typical operating time when fully charged: approx. 80 hours
- Typiical charging time: approx. 8 hours
- Mechanical test item connection ISO 1174-1:
- Square (female)
+ Ranges 0,5/2,5/5/10 Nm: 1/4"
+ Ranges 25/50 Nm: 3/8"
+ Ranges 100/250 Nm: 1/2"
+ Ranges 500/1000 Nm: 3/4"
- Maximal working load: 100% FS
- Maximal overload: 150% FS
- Burst load: >300% FS
- Housing protection degree: IP 40 according to EN 60529
- Material: Aluminium and steel, black coated
- Sensor material: Stainless steel 17-4 PH