- The emco PTM 5 is a battery-powered, electronic mobile measuring device for the determination of the thickness of non-metal materials, such as papers, textiles, veneers, wood, leather, rubber, plastic and glass. The measurement conditions according to DIN EN 50981 and 50984 for the determination of the thickness of paper are ensured.
- Immediately ready to be used, pre-programmed calibrated
- Measuring range from 0 to 5 mm
- High measuring accuracy
- Measurement on contact pressure of 100 ± 10 kPa
- Simple zero-balance against the test platform
- Display can be switched between µm, mm and mils (1/1000 inch)
- PTM 5-M with measuring value storage, RS232 and software
- Adapted for continuous measurements
Thông số kỹ thuật
- Measuring range 0 - 5000 µm, 0 - 200 mil
- Display of measured values selectable 0.0 - 999 in µm
1.00 - 5.00 in mm
0.00 - 200 in mil
- Resolution selectable 0.1 µm in the range of 0 - 99.9 µm
1 µm in the range of 100 - 999 µm
0.01 mm in the range of 1.00 - 5.00 mm
0.01 mil in the range of 0.00 - 9.99 mil
0.1 mil in the range of 10.0 - 99.9 mil
1 mil in the range of 100 - 200 mil
- Repeatability ±(5 µm + 5%)
- Standard tolerance ±1 µm / ±0.06 mil
- Minimum object size 10 mm x 10 mm
- Temperature range (Storage) -10 °C - 60 °C
- Temperature range (Operating) 0 °C - 60 °C
- Probes single point
- Power supply 9 Volt E Block alkaline
- Dimension (LxWxH) 118 mm x 58 mm x 38 mm
- Weight approx. 150 g incl. battery