| Rep Rate: |
2.0 Hz to 500 kHz |
| Witdh: |
100 ns to 1 ms |
| Delay: |
250 ns to 10 ms |
| Rise Time: |
50 ns to 10 us (10 % - 90 %) in 8 steps |
| Decay Time: |
0.5 us to 1.0 ms (100 % - 37 %) in 11 steps |
| Amplitude |
0.0 to 10.0 V (0 to 5 V into 50 ohms)
Scaleable in energy units. (kev)
|
| Resolution: |
155 uV |
| Jitter: |
± 10 ppm |
| Attenuation: |
0, 2, 5, 10, 20, 50, 100, 200, 500, 1000 |
| Integral non-linearity: |
± 15 ppm |
| Temperature stability: |
± 5 ppm per ºC from 20ºC to 45ºC |
| Pulse Type: |
Flat-top or Tail pulse - In tail mode, rise time is a fixed 50 ns, decay time is adjustable. In flat-top mode, both rise time and decay time are adjustable. |
| Polarity: |
Positive/Negative |
| Ext. Trigger: |
0 to 500 kHz, +100 mV to +3.5 v, threshold adjustable. |
| Width: |
100 ns to 1 ms |
| Modes: |
Single pulse via a front panel pushbutton;
Internal Rep Rate;
External Trigger;
External Gate with the same pulse requirements as Ext Trig;
Internal Ramp-adjustable start and stop points; adjustable ramp period 30-900 s, selectable number of ramp cycles, ramp in keV or volts. Clamped baseline option to bring the baseline to zero prior to the next pulse.
|
| Stored Settings: |
Up to 9 complete configurations with recall. Also stores parameters in use at shutdown for automatic recall when powered on. |
| Remote: |
RS232 at 9600 baud, User Customized or LabView Drivers. |
| Power Required: |
+24V , 170 ma
-24V , 150 ma
+12V , 450 ma
-12V , 5 ma
Portable power supply available for applications that require portability or benchtop use. See BNC Model AP-3 Portable NIM Power Supply.
|
| Mechanical: |
Triple-witdh AEC NIM module 4.05" wide x 8.70" high in accordance with TID-20893 ( Rev 3. ). |
| Weight: |
2 lbs. 13 oz. net, 6 lbs shipping. |