A high accuracy AC and DC power calibrator suitable for calibrating watt-meters, power meters, and kW-Hr meters. Supplied with its own "PC Virtual Control” software allowing the user full control via laptop or PC. Frequency can be set in 0.1Hz steps from 45 to 400Hz, and phase in 0.1degree steps. Alternatively power factor (PF) can be set in 0.01 steps. The output can be displayed as VA or Watts.
The standard maximum AC current output (22A) can be extended to 100A by using an optional 100A current transformer. This extends the maximum power to 0.1MW/MVA. A clamp meter adaptor option is also available (1 and 50 turns).
| Warm up |
1 Hour to full accuracy |
| Settling Time |
Less than 5 seconds |
|
Standard Interfaces
|
GPIB (IEEE-488), RS-232, USB
|
| Temp Performance |
Operating: 0 to 40°C, Full Spec: 23°C +/- 5°C, Storage: -10°C to 50°C |
| Operating Humidity |
< 80% non-condensing |
| Operating Altitude |
0 to 3km. Non operating: 3km to 12km |
| Line Power |
100 - 230V AC 50/60Hz. Power Consumption 60W typical, 80W Max. |
|
Dimensions
|
W440 x H198 x D580mm (17.6 x 7.8 x 32.8”)
|
| Weight |
25kg (36lbs) |
| Country of Origin |
UK |
|
Supplied With
|
Virtual control software, user manual, RS-232 cable, and USB adaptor/cable
|