Trang chủ Thiết Bị Đo Lường Quân Sự Đo kiểm quang học - quang vật lý Thiết bị hãng Trioptics

OptiCentric® 3D - Highly Innovative Measurement of Centration and Center Thickness/Air Gap of Optical Systems

Mã sản phẩm: OptiCentric® 3D |
Thương hiệu: Trioptics

Giá bán: Liên hệ

The OptiCentric® 3D provides an ideal solution for the complete opto-mechanical characterization of assembled optical systems.

Yêu Cầu Giá Tốt

Zalo/tell: 0984.843.683

Email: hien@ttech.vn

Thông tin sản phẩm

The two-in-one solution combines OptiCentric® centration error measurement technology with a low-coherence interferometer called OptiSurf®, measuring the air gaps between lens surfaces and the center thicknesses of lenses within the optical system. The cross-interaction of both measurement systems provides a significant increase of the overall measurement accuracy and detailed manufacturing quality information.

Key Features

Accuracy of centration measurement better than 0.1 µm; accuracy of air gap/center thickness measurement up to 0.15 µm
Centration measurement within objective lenses (MultiLens Update included)
Large range of software options: AspheroCheck, SmartAlign
Exchangeable head lenses for virtually unlimited measurement range without the need for inconveniently long stage movements of the measuring head
Magnification optimized for every single lens surface
Accurate and automated focusing of the measuring head by motorized linear stage
Modular: all accessories are of modular design and fully integrated into the software

Applications

Perfect for the manufacturing of optical assemblies: simultaneous control of centration and air gap parameters
Full opto-mechanical qualification of assembled optical systems
Measurement of plano optics
Measurement of cylinder lenses
Measurement of EFL, Radius, FFL (OptiSpheric® update)
Measurement of spherical/ aspherical lenses
Measurement of infrared optics (OptiCentric®/OptiSurf® configuration depending on lens material and application)
1) In stable environment conditions in 100 mm height over the top surface of the air bearing
2) Other electronic autocollimators on request
3) Other on request

	OptiCentric® 3D 100	OptiCentric® 3D 300
Measurement accuracy in VIS range 1)	0.1 µm	0.1 µm
Measurement accuracy center thickness (OptiSurf® UltraPrecision)	1 µm (0.15 µm)	1 µm (0.15 µm)
Sample diameter	0.5 – 225 mm	0.5 – 400 mm
Lens rotation	Air bearing AB 100 (option: lens rotation device)	Air bearing AB 300 (option: lens rotation device)
Max. sample weight	Max. 20 kg	300 kg
Linear stage	Motorized and PC-controlled	Motorized and PC-controlled
Measurement head for VIS spectral range 2)	electronic ACM, 200 mm EFL	electronic ACM, 200 mm EFL
Light source3)	High power LED light source	High power LED light source