MÁY VÒNG RING MARKERS Medek & Schorner RC 707T
MODEL: MEDEK & SCHORNER RC 707T
HÃNG SX: MEDEK & SCHORNER - ÁO
Narrow and Compact.
RC 707 T Common Features Rugged, virtually maintenance-free servo drive. Marking drums run absolutely vibration-free, with no control variations. Ink paths contain no rotating gaskets. Ring marking by rotating drum with high-precision ink nozzles. Exceptionally crisp marking Since the marking heads are arranged transversally to the extrusion line, the tandem machine requires only approximately 250 mm along the extrusion line. This makes the RC 707 T high performance system the optimum choice for foam skin plants. D D D D D D D Ring marking system for marking hot telephone and hookup wire insulation with colored rings at production speeds up to 1800 m/min. The RC 707 T has been specifically designed for use in high speed extrusion plants that provide little room between the extruder and cooling bath (foam skin plants). Tandem system with two marking heads, allowing change of ring distance and/or ring color on the fly.
Common Features
Rugged, virtually maintenance-free servo drive.
Marking drums run absolutely vibration-free, with no control variations.
Ink paths contain no rotating gaskets.
Ring marking by rotating drum with high-precision ink nozzles.
Exceptionally crisp marking
Since the marking heads are arranged transversally to the extrusion line, the tandem machine requires only approximately 250 mm along the extrusion line.
This makes the RC 707 T high performance system the optimum choice for foam skin plants.
Specifications
Max. marking speed: 1800 m/minute
Max. wire outside diameter: 3 mm (special version for up to 5 mm available)
Extremely narrow (approximately 250 mm along the extrusion line).
Automatic synchronization to the line over a 1:6 speed range (requires a 0 V to 10 V signal proportional to the line speed; for lines providing no such control signal a dedicated frequency generator with tachometer wheel and incremental encoder is available as an option).
With diaphragm pump (for water based inks). Built-in ink cooler.
Ink filter system prevents clogging of ink nozzles. Ink supply system designed to accomodate 5-liter ink tanks.
Easy to set up and operate.
Rugged, reliable single-drum marking assembly.
No rotating gaskets in the marking assembly.
Interchangeable marking drums for easy changing of ring spacing and width.
Marking drums for standard and custom ring patterns available.
The congruence of ring halfes sprayed on from both sides can be adjusted by varying the transverse position of the marking head relative to the wire.
The automatic, motorized transversal positioning system allows up to 99 different positions to be stored and the marking head to be moved automatically to each stored position.
Automatically synchronized flashing stroboscope for quality monitoring and setting up marking parameters.