- The Mercury-4 strips wires and cables ranging in size from 0.0010 to 16 mm2 (50 to 6 AWG). Using the color touchscreen, the operator selects the desired stripping parameters from the programmed library and all parameters (strip lengths, laser power and speed, etc.) are automatically set. Once the operator selects the required program, the machine is ready for operation. The Mercury-4 can strip cables inserted into the supplied fixture aperture to an end stop, or via a custom fixture plate. A camera allows the whole process to be monitored.
- High quality, nick-free stripping
- Strips all polymer materials and colors
- Non-contact – no wear parts
- 0.0010 to 16 mm2 (50 to 6 AWG)
- Powerful and flexible processing capabilities
- 20 watt CO2 Laser
Thông số kỹ thuật
- Wire cross section : 0.0010 to 16 mm2 (50 to 6 AWG)
- Maximum outer diameter : 6 mm (0.24"), other applications upon request
- Minimum stripping length : 0.5 mm (0.02")
- Maximum full stripping length : 50 mm (2.0")
- Maximum partial stripping length : 100 mm (4.0")
- Maximum slitting length : 50 mm (2.0")
- Length increments : 0.1 mm (0.001")
- Beam speed : Up to 80"/s (2,032 mm/s)
- Optics system : High speed, dual axis galvo scanners
- Cycle time : 2 s for most materials
- Cycle start : Via touchscreen or optional foot pedal
- Strip types : Circumferential strip, linear slit, ablation, any stripping pattern in a 50 x 50 mm (2 x 2") strip area
- Processable insulation materials : PTFE / Teflon, Tefzel, PVC, Polyurethane, Silicon, Kapton, Polyimide, Polyesterimide, Polyester, Fibreglass, Polyethylene, Nylon
- Program memory : Unlimited
- Interfaces : USB, external trigger / busy
- User interface : 7" color touchscreen
- Noise level : < 80 dB (A)
- Power supply : 100 / 115 VAC, 230 / 240 VAC, 1.5 kW / 50/60 Hz
- Dimension (L x W x H) : 500 x 150 x 560 mm (20 x 6 x 22") ; 250 x 400 x 500 mm (10 x 16 x 20") control cabinet
- Weight : 20 kg (44 lbs.) Bench unit: 20 kg (44 lbs) control cabinet
- Conformity : The Mercury-4 fully complies with all CE, OSHA and FDA guidelines relative to mechanical, electrical and laser safety. Class 1 enclosure incorporating a Class 4 laser product.
- Important note : Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.