The JX11 is universally applicable meter for photometric, radiometric and luminous color quantities in combination with the appropriate probe heads. USB interface equipped. The JX11 can be operated with several detector heads. In order for the meter to display the measured values in absolute quantities, the meter must be 'told' which probe is connected to it. The calibration correction data of the probe ordered together with the meter is stored in the meter at the factory. The menu mode (see section 1.8) is used to select the correct factor in the JX11. If the probe was calibrated with removable accessories, the appropriate calibration for the detector head with the selected accessory must be activated. If the detector head calibration includes a data table of its wavelength dependent sensitivity, the wavelength to be measured must be selected.
Features:
Display-LCD graphic display (97 x 32 pixel); 4 rows each 14 characters; LED background illumination with on/off switch Manual calibration - Input through USB interface; permanent storage in eeprom. Interface - USB Spec. 1.1 (HID device)