POWER MEASUREMENT TOO
From the laboratory to the field, from diagnostics to troubleshooting, bench-top or handheld - several instruments in one!
The Scopix III is now equipped with an extended 50k memory, considerably increasing the recording durations available. With the HX0075 software option, the OX 7042 can now be used for power measurements: single and three-phase power, display of DPF and harmonic analysis on the apparent power.
Rich with original functions, like the whole SCOPIX range, the OX 7042 dual-channel 40MHz digital oscilloscope, a "multi-instrument" with a minimum footprint, provides outstanding performance, thanks in particular to its 12-bit / 2.5 GS/s converter.
Control: 33 direct control keys / Windows-like menus / touch screen. Exceptionally easy to read, monochrome or colour screen.
In addition to its advanced triggering functions (pulse width, count, delay, TV), SCOPIX III offers a new function: triggering and automatic storage of faults on the basis of the measurement thresholds. This new function is available in the Oscilloscope and Multimeter modes.
This OSCILLOSCOPE also has "MATH" functions that can be used to define, for each trace, a mathematical function and a vertical scale with the definition of the true physical unit.
The multi-channel TRMS digital MULTIMETER - 8,000 counts, 200kHz - measures amplitudes, resistances, continuity, capacitances, frequencies and temperatures, and performs tests on components.
The HARMONIC ANALYZER(optional) can display the first 32 orders for signals with a fundamental frequency between 40 and 450Hz.
The 2-channel DIGITAL RECORDER (optional) allows acquisition intervals of 500µs between 2 measurements, for records that can extend over 1 month, based on the monitoring of tolerance thresholds in particular.
Thanks to FFT, the qualitative analysis of harmonics, signal distortion and pulse response, and the investigation of noise sources in logic circuits lead to effective diagnostics.
The patented PROBIX plug-and-play system of accessories ensures rapid implementation of the instrument, with no risk of error. The sensor coefficients, scales, and units and the configurations of the channels are managed automatically; the probes and adapters are recognized as soon as they are connected.
The Ethernet interface and built-in web server make it possible to take control of the instrument remotely, and to transfer curves and screen shots without additional software.
40MHz
Time base from 1 ns to 200 s/Div. - Recording duration of up to 30 min (oscilloscope mode)
2 totally isolated measurement channels, 600V, Cat. III
2 independent TRMS digital multimeters
Sampling per channel: 100 GS/s in ETS, 2.5 GS/s in one-shot.
Fast charge 2h; battery life 4h