| RH Measurements |
±2% for 10-90%+ ±3% for 0-10% and > 90% |
| Temperature Measurements |
±0.5°F for 32°F to 120°F+ ±1°F less 32°F to 5°F+ ±1°F above 120°F to 160°F |
| Display |
0.1% resolution for the entire range |
| Calibration |
All RH BluePegs are NIST certified |
| Standard Sleeve |
Following ASTM-F2170 for a 4 inch slab we offer sleeves and caps at 1.8 inches. If longer sleeves are desired we also offer 3.0″ sleeves that can be shortened to desired lengths |
| Calibration Check |
During the first year, Lignomat will test the calibration of the RH BluePeg probes three times without a charge. To check the calibration we offer calibration check salts. T-75 and T-75/33 |
| Included |
Ligno-DuoTec BW, RH BluePeg sensor, 10 1.8 inch sleeves and caps, RH adapter for ambient conditions, RH cable with seal plug and small hard-shell carrying case |
| Size |
12″ X 8″ X 3.5″ |
| Weight |
3 lbs |
| Warranty |
All moisture meters have a 2 year warranty. RH sensor has a 1 year warranty and battery are excluded |
The Package T-1KP consists of the LignoTec RH, RH BluePeg, RH cable, 10 RH Sleeves and caps and a carrying pouch. The Ligno-Tec RH was designed for reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage.
RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hole in the testing area. Operation is that easy! Without studying pages and pages of operation manuals: Depress SET Button to check settings. Use up or down buttons to correct settings. Depress % Button for moisture readings. Instrument turns itself off automatically.
At any time you can change from pin mode to scan mode by depressing up or down button.
For more information on the Ligno-Tec RH measuring system please contact Customer Service at 1-800-227-2105.