- AC powered model with relay output for stand-alone operation. Single channel system with manual and automatic operation. Two levels per each mode for individual range setting.
- Timer functions for on-delay, off-delay and pulse forming. Light/dark switchmode for inverted output signal. Two frequency settings allow close mounting of adjacent beams.
- Sensor alignment information and diagnostics are available at the touch of a button. The analog output makes sensor alignment easy and can also be used for simple measurement tasks.
- LED indicators for output signal and gain control. Alarm indicator and alarm output. Relay output for high current loads. Test input for functional test by external test equipment.
- Single channel opto sensor
- Detection range up to 50 m (164 ft)
- AC operation and relay output
- 2 manual operating modes
- 2 automatic operating modes
- Light/dark switching
- 2 frequency settings
- 4 timer functions
- Sensor-control
- Test function and diagnostic
- Alarm output and sensor error output
- Test input for external functional test
Thông số kỹ thuật
- Number of channels : 1
- Multiplex-speed : -
- Range (using transmitter ITL combined with receiver IRL / IRH) : 8 m / 15 m (26 ft / 49 ft)
- Range (using transmitter ITH combined with receiver IRL / IRH) : 10 m / 20 m (33 ft / 66 ft)
- Range (using transmitter ITA combined with receiver IRL / IRH) : 20 m / 50 m (66 ft / 164 ft)
- Operating modes : 2 manual / 2 automatic
- Transmit frequencies : 3,7 / 4,3 kHz
- Switching output : 250 V AC / 5 A
- Switching frequency : 20 Hz
- Alarm output : Normally open contact 60 V AC, 100 mA
- Error output : Normally open contact 60 V AC, 100 mA
- Analog output : -
- Test input : Activ low
- Supply voltage : 230 / 115 / 24 V AC