- Multiple sensor can be easily built at a site and installation work is simple and speedy
- MEMS (Micro Electro Mechanical Systems) sensor is applied and low power consumption.
- Minimum interval of deployment is 50 cm and equivalent data of general borehole inclinometer can be obtained.
- Continuous monitoring by remote monitoring system can be easily prepared with the i-SENSOR2 LinQ-Tilt.
- Measurement and data transmission interval are automatically changeable by setting threshold on the self-judgment functions.
Thông số kỹ thuật
Probe
| Measurement direction |
2 axes (A axis, B axis) |
| Output data |
Angular representation |
| Measurement range |
+/- 15° |
| Resolution |
0.001° |
| Measurement accuracy |
+/- 0.1 % F.S. |
| Temperature characteristic |
+/- 0.008°/°C and lower |
| Data transmission |
RS-485 (4-core cable) |
| Connectable number |
Up to 20 units |
| Installation interval |
min. 50 cm |
| Cable length |
max. 120 m |
| Power consumption |
25 mA and lower (at DC 12 V) per 1 unit |
Logger
| Inclinometer |
Connection sensor |
LinQ-Tilt (MODEL-4499) |
| Data storage capacity |
approx. 10,000 data (at 20 units) |
|
approx. 43,000 data (at 3 units) |
| Interface |
USB |
USB2.0 × 1 port (For conversion port between USB and RS232C) |
| Memory card |
SD-card, SDHC-card |
| Communication card |
SIM-card (GSM/GPRS) |
| LED |
Status LED=Activating conditions (Access LED=Battery check and Writing task into SD) |
| Outer contact input |
3 ch |
| Outer contact output |
3 ch (non-contact output) |
| Communication |
Packet communication |
GSM/GPRS |
| Time & position |
GPS |
| Power source |
DC+6 to DC+15 V |
|
| Protection grade |
Splash-proof |
|
| Outer Dimension |
approx. φ85 × 220 mm |
(excluding projections) |
| Weight |
approx. 1 kg |
(excluding battery) |