- The Mako G-192 is a 1.9 megapixel GigE machine vision camera that incorporates the high quality Type 1/1.8 (9 mm diagonal) Teledyne e2v Sapphire EV76C570 CMOS sensor. At full resolution, this camera runs 60 frames per second. With a smaller region of interest, higher frame rates are possible. Mako G-192 is offered in both monochrome (G-192B) and color (G-192C) models.
- Mako G cameras have the same ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet (PoE), two opto-isolated outputs, and a 64 MByte image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship with IRC Hoya C-5000 IR cut filter.
- Image optimization features:
+ Auto gain (manual gain control: 0 to 24 dB; 1 dB increments)
+ Auto exposure (exposure time control varies by pixel format)
+ Auto white balance (G-192C only)
+ Binning (1x1 and 2x2 binning)
+ Color correction, hue, saturation (G-192C only)
+ Decimation
+ Gamma correction
+ One look-up table (LUT)
+ Pixel defect masking
+ Region of interest (ROI), separate ROI for auto features
+ Reverse X/Y
- Camera control features:
+ Event channel
+ Image chunk data
+ Storable user sets
+ StreamBytesPerSecond (bandwidth control)
+ Stream hold
+ Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
+ Switchable Rolling / Global / GlobalReset shutter modes
+ Temperature monitoring (main board only)