- The VUFM 1670 is small, lightweight and low priced non frequency selective Efield meter. It can be used for relatively high field strengths e.g. to observe the field in a TEM cell or a strip line.
- Measuring range of electric field strength : 1 V/m – 300 V/m
- Low edge of indication starts from : 0,3 – 0,5 V/m
- Indication by moving coil meter : 60x30 mm
- Ranges selected by toggle switch with 3 positions :
1 V/m – 5 V/m ; 5 V/m – 30 V/m ; 50 V/m – 300 V/m
- Linearity from 2 V/m – 300 V/m : +/–1,5 dB
- Specified frequency range : 70 kHz – 1 GHz
- Extended frequency ranges (correction required) : 9 kHz – 70 kHz ; 1 GHz – 3 GHz
- Error caused by frequency in the frequency range 100 kHz – 100 MHz : +/–1 dB
- Error caused by frequency in the frequency ranges 70 kHz – 100 kHz and 100 MHz – 1 GHz : +/–2 dB
- Current consumption typically : 0.9 mA
- Power supply by built in 5 cell battery pack standard type >800 mAmps with Z-shaped soldering tags : NiMH Mignon AA
- Dimensions & weight meter unit (WxHxD) : ca. 120 x 80 x 110 mm
- Weight including battery and dipole : ca. 890 g
- Probe dipole length : 80 mm
- Probe length incl. connector : 160 mm
- Probe weight : Ca. 55 g
- Construction of the meter unit housing : Aluminium
- Probe completely made from insulating material, connector on the bottom for direct mounting on the meter unit : BNC female
- Tripod mounting by standard thread in the bottom plate : 1/4’’ female