FSI-10 Fiber Signal Identifier is a low-cost, portable instrument designed to detect optical signals without interrupting traffic. During maintenance, installations, rerouting or restorations, it is often necessary to isolate a specific fiber.
FSI-10 is recommended for both 0.25mm/0.9mm bare fiber and 3mm jacketed fiber. By simply clamping FSI onto a fiber, the FSI will indicate if there is a signal, a CW, 270Hz, 1KHz or 2KHz wave, or traffic and show the signal direction. It can also be used for locating a particular dark fiber.
A highly impact-resistant molded plastic case makes FSI-10 suitable for use both indoors and outdoors.
Key Features
-
Easy and convenient operation with a single keystroke
-
Detecting life CW or 2KHz signal
-
Locates a particular dark fiber using tone recognition (270 Hz, 1 kHz or 2 kHz)
-
Displays signal intensity
-
Low battery reminder
-
Concise LED Indicators
-
Interchangeable adaptor heads (clamps) for jacketed and coated fiber
Specifications
|
Sensitivity
|
1310nm(typical)
|
1550nm(typical)
|
|
Continuous Wave
|
-23dBm
|
-30dBm
|
|
2KHz Modulated Wave
|
-10dBm
|
-18dBm
|
|
1KHz Modulated Wave
|
-10dBm
|
-18dBm
|
|
270Hz Modulated Wave
|
-10dBm
|
-18dBm
|
|
|
|
|
Recognizable Wavelength Range
|
900 to 1650nm
|
|
Recognizable signal type
|
CW, 270Hz +/-5%, 2kHz +/-5%, 1kHz +/-5%
|
|
Detector Type
|
InGaAa 2pcs
|
|
Clamp Type
|
RB0.25 for tightly buffered fibers
RB0.9 for bare fibers
RB3.0 for jacketed fiber
|
|
LED Indicators
|
Signal On-Line
Signal Traffic: Left or Right
Signal Frequencies: 270Hz, 1kHz and 2kHz
Signal Intensity: 5 grades
Low Battery
|
|
Operating Temperature
|
-10 ~ +50C
|
|
Storage Temperature
|
-20 ~ +60C
|
|
Relative Humidity
|
< 95% (Non-condensing)
|
|
Dimension (mm)
|
240L x 120W x 65H
|
|
Weight
|
640g
|