| Control Display |
| CPU |
Ultra low power ARM Processor running at 533 MHz |
| Memory |
64 MB RAM, 256 MB Internal Flash, 4GB Ultra High Speed Memory |
| Display |
(Sunlight-readable) backlit TFT colour graphic display with AR coating |
| Resolution |
QVGA, 320 x 240 Pixel; Dimensions: 3.5 inch diagonal |
| Keyboard elements |
Navigation cursor cross with up, clear and menu keys; Alphanumeric keyboard with dimensions, measure and results hard keys |
| LED indicators |
On-screen Icon indicator for laser status and alignment condition 2 LED (Red+Green) for wireless communication and battery status |
| Power supply |
Operating time: up to 10 hrs (LiPo rechargeable battery) |
| External interface |
1 x USB host for external memory (up to 32GB) 1 x USB slave for PC communication / Power bank quick charge RS232 (serial) for S & M transducers |
| Integrated wireless communication |
Class 1 (up to 100m) |
| Charging adapter |
AC charging adapter /Direct USB charging |
| Environmental protection |
IP 65 (dustproof and water spray resistant), shockproof |
| Accuracy of system |
< 2% ± 0,01 mm |
| Temperature range |
0 - 40 °C (32 - 104 °F) |
| Operating humidity |
< 90 % |
| Carrying case dimensions |
390 × 310 × 192 mm (15.4 × 12.2 × 7.6 in) |
| Total weight (incl. Case) |
4,5 kg (10.8 lbs) |
| Warranty |
2 years standard warranty + 2 additional year upon registration |
| CE conformity |
EC guidelines for electric devices (2004/108 EWG) are fulfilled |
| Measuring units |
| Housing material |
ABS plastic |
| Type of laser |
Diode laser |
| Laser wave length |
650 - 675 nm |
| Laser safety class |
2 |
| Maximum laser power |
1 mW |
| Distance between measuring units |
Maximum: 3000 mm (33 ft)Minimum: 70 mm (2.7 in) |
| Type of detectors |
Single axis PSD, 24 × 0,9 mm (0.95 × 0.04 in) |
| Cable |
Integrated wireless communication Class 1 (up to 100m) |
| Dimensions |
87 × 79 × 39 mm (3.4 × 3.1 × 1.5 in) |
| Weight |
125 gram (7.3 oz) |
| PC download |
Plug in to PC by USB socket |
| Memory |
4GB, thousands alignments |
| Softfoot check |
Yes |
| Alignment tolerance check |
Yes |
| User editable tolerances |
Yes |
| Shaft diameter range |
20 - 1000 mm |
Battery
|
up to 12 hours continuous use (rechargeable LiPo battery) |
| Sensors |
Single axis PSD, 24 × 0,9 mm (0.95 × 0.04 in); electronic inclinometer ±0,1° |
| Communication |
Integrated wireless communication Class 1 (up to 100m) |
|
Miscelaneous
|
| System Measuring distance |
0,07 to 3 m (0.23 to 10 ft.) |
| Measuring errors, displayed resolution |
<0,5% ±5 μm;1μm / 10 μm (0.04/0.4 mils) |
| Shaft diameters |
20 to 250 mm (0.8 to 10 in.) diameter with supplied chains |
| Mounting system |
2 × V-brackets; 2 × chains; 2 × threaded rods per V-bracket |
| Complete system contents: |
| 1. Display unit (batteries included) |
7. USB cable |
| 2. 2 mechanical shaft fixtures |
8. Quick Start Guide |
| 3. 2 locking chains with tightening pin |
9. Calibration certificate valid for 2 years |
| 4. Chain included for shaft diameters 20 - 150 mm (1.2 - 5.9 in) |
10. CD with instructions for use and instructional video |
| 5. Optional chain for shaft diameters 150 - 500 mm (5.9 - 20 in) |
11. Carrying case |
| 6. Measuring tape |