ELECTROCHEMICAL TRACE METAL ANALYZER - IONIX Steroglass

In compliance with the current regulations (i.e. EC REGULATION n° 466/2001) on the maximum concentration level, heavy metal detection in waters, air, ground, food, oil and cosmetic fields has become fundamental for the public and environmental health.

IONIX is a high-sensitivity analysis unit able to detect metal traces in different simple or complex matrixes. High speed to measure the potential variations, with their subsequent processing, allows to reach a high detectability level (often below ppb). Thus, very small metal traces can be accurately and repeatedly detected and quantified. 


Unlike other similar techniques, analyses can be run on the ORIGINAL sample too, that is matrixes do not require any chemical or physical pre-treatment; moreover, samples are not destroyed during analyses. This makes IONIX particularly suitable for routine analyses and for use by non-particularly skilled operators. Spot on-site analyses can be performed thanks to its small compact size. 


UPDATED TECHNIQUES: 
-PSA (Anodic Stripping Analysis) 
-CCSA (Constant current stripping analysis) 
-DPS (Differential pulse) 
-SWS (Square Wave) 
-CYU (Cyclic Voltammetry) 


HEAVY METALS AND OTHER ORGANIC COMPOUNDS DETECTABLE: 
Aluminum - Antimony - Arsenic - Bismuth - Cadmium - Cobalt - Chromium - Iron - Gallium - Manganese - Mercury - Molybdenum - Nickel - Lead - Copper - Selenium - Tin - Thallium - Titanium 
Uranium - Vanadium - Zinc. 


NOTE: Detectability limits and actual analyzability of the heavy metals and other organic compouns listed above depend on the kind of matrix and treatment conditions (e.g. mineralization, reagents purity, laboratory environmental conditions, operator's skills). 


GENERAL SPECIFICATIONS 
Power supply: 115 -230 Vac +/-10% 50-60 Hz 35VA 
Dimensions WxLxH: 200 x 230 x 350 mm 
Weight:8.5 kg 
Minimum PC Requirements
Processor: Pentium® III 
System memory: 1Gb RAM (52Gb recommended) 
Hard disk free space: 100 Mb 
CD-ROM unit: Yes 
Serial port: N° 2 serial ports (RS-232 or USB) 
Monitor: VGA monitor (1280x1024) or more 
Printer: Any Windows" compatible printer 
Operating system: Microsoft® Windows" XP 


ELECTRICAL SPECIFICATIONS 
Output voltage: ±12V 
Response time: d100µs 
Output impedance: e100M& 
Current ranges: ±2mA up to ±2nA 
Resolution: 16 bit 
Input voltage range: ±10V 
Input impedance: ±1012 & 
Input leakage current: d10pA 
Input noise: d25µVpp 
Analog-digital conversion
Potential range: ±4096 mV 
Resolution: 16 bit (±125 µV) 
Conversion speed: e100 K sample/s