Đồng hồ đo điện trở bề mặt Simco ST-4

Mã sản phẩm: Simco ST-4 |
Thương hiệu:

Giá bán: Liên hệ

Đồng hồ đo điện trở bề mặt Simco ST-4

Thông tin sản phẩm

Đồng hồ đo điện trở bề mặt Simco ST-4

SIMCO surface resistance meter ST-4 product performance
SIMCO surface resistance meter ST-4 relatively rare hand-held type, hold the switch for about 15 seconds to show the product surface resistance value. ST-4 is easy to carry, easy to operate, the test placed on the surface of the measured object can test the surface resistance of the object, you can also test the conductive pad grounding leakage resistance.
SIMCO surface resistance meter ST-4 product features
1. Place the surface resistance of the product on the surface of the measured object.
2. Because it is easy to carry, suitable for on-site operation.
3. Built-in battery timer, do not worry about forget to replace the battery, the other use of environmentally friendly rechargeable batteries.
4. Measuring range: 103-1013Ω, can test a variety of product resistance value for conductive pads, conductive floors, conductive bags and other anti-static production inspection, maintenance, management and so on.
5. Can support the IEC International Electrotechnical Commission test standard mode (optional) IEC specifications of the electrode (contact area, weight) to meet the measurement standards.
SIMCO surface resistance meter ST-4 measurement mode
① standard measurement mode
(Ohm per square, Surface Resistivity)
② resistance between the electrostatic pad and ground terminal measurement mode
(Ohms, Resistivity to Ground)
Use of ancillary accessories
③IEC specifications of the resistance measurement model
IEC standard electrode (contact area weight) of the standard measurement mode
SIMCO surface resistance meter ST- 4 LED display
①TEST
Green LED light: standard measurement mode
(Ohm per square, Surface Resistivity)
Red LED: Resistive measurement mode between the electrostatic pad and the ground terminal
(Ohms, Resistivity to Ground)
IEC resistance measurement mode display
② measured voltage display (10V, 100V)
Green LED lights: 10V output
Red LED lights: 100V output
Yellow LED: End of measurement
③ CHARGE
Red LED: Displays the battery charge

Công ty CP Công Nghệ Đỉnh Cao

Trụ sở: Số 12 Chân Cầm, Hàng Trống, Hoàn Kiếm, Hà nội

VPGD: Phòng E2, Tòa nhà C4, Đường Đỗ Nhuận, Xuân Đỉnh, Từ Liêm, Hà nội

Tel: +84 (4) 22428148; Cel: 0984843683,Fax: +84 (4) 37505143

VPGD: Tầng 19, Tòa nhà Indochina/ Số 4, Nguyễn Đình Chiểu, P.Đakao, Q.1,

TP Hồ Chí Minh..

Tel: 08.6685 8911 Fax: 08.6284 0993.

Website: www.ttech.vn, www.store.ttech.vn, www.tshops.vn, www.stock.ttech.vn, http://www.omega-air.vn/


SẢN PHẨM CÙNG DANH MỤC