- Dissolved Oxygen Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.
- The Dissolved Oxygen Meter housing in a robust IP68 proof enclosure, 1500 N tensile strength Kelvar reinforced cable, up to 1.2 km digital data transmission, the Dissolved oxygen - Transmitter is ideally used in water/wastewater industry.
- Robust IP68 Water Submersible Enclosure, Solution Without Cabinet
- 1 sec On-line Realtime Measurement
- 0.02W Ultra Low Power Consumption, Ideal for Outdoor Applications
- Temperature Compensation
- High Reliability, Drift Free
- Lightening and Surge Protection for Power and RS485 Communication
- 1.2 Km RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Software Configuration Calibration and Data Monitoring
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI, Eliminate I/O Module Cost
- Onboard memory allowing users to easily calibrate and configure sensor at lab and distribute to various fields sites
Thông số kỹ thuật
- Measurement range : 0 ~ 20 ppm (mg/L) (0~200 %)
- Accuracy : ±1% FS (0~20 ppm)
- Resolution : 0.01 ppm (mg/L)
- Repeatability : ±0.5% FS
- Light source : LED 495 nm
- Operation pressure : 5 Kgf/cm2
- Operating temperature : 0~60°C
- Process flow rate : Min, 0.1 m/sec
- Response time : 30 sec
- Protection : IP68
- Temperature sensor : Pt100
- Temperature measurement range : 0~60°C
- Temperature accuracy : ±0.5 °C; ±0.1 °C(optional)
- Housing : SS316L; Titanium
- Dimension : Φ25 Χ146 mm
- Weight : analyzer: approx. 450g ; cable: 80 g/m