Capacitive coupling clamp for automotive testing ACC EM TEST

Mã sản phẩm: ACC |
Thương hiệu: EM TEST

Giá bán: Liên hệ
The capacitive coupling clamp ACC is used to couple fast transient pulses to I/O lines as required in different national and international standards and car manufacturer specifications for automotive testing. The effective coupling capacitance depends on the diameter and the material of the used cables. A typical value will be around 100 pF.

Yêu Cầu Giá Tốt

Thông tin sản phẩm
Highlights


Strictly acc. to ISO 7637 and many car manufacturer specifications
Precise construction with highest quality surfaces
Accept cables up to 40 mm diameter
Characteristic impedance 50 Ohm



Benefits

The coupling on signal lines can usually not be effected capacitively without interfering with the signal flow. It is often impossible to contact the required circuit (direct), e.g. coaxial or shielded cables. In this case the coupling is realized with the capacitive coupling clamp. The interference simulator can be connected via a coaxial cable on both sides of the ACC coupling clamp.


SẢN PHẨM CÙNG DANH MỤC
Audio transformer assembly for LF conducted immunity testing CN 200N1 EM TEST
Audio transformer assembly for LF conducted immunity testinging for electrical vehicles CN 200N Series EM TEST
LF signal & amplifier DC (0Hz) to 250kHz (500kHz), 800W AMP 200N1.1 EM TEST
Low frequency signal source DC (0Hz) to 250kHz AMP 200N EM TEST
4-Quadrant Voltage Drop Simulator VDS 200Q EM TEST
Voltage Drop Simulator VDS 200N EM TEST
Generates and records automotive waveforms EM TEST
Electrostatic Discharge Simulator up to 30 kV esd NX30 EM TEST
Load Dump Generator with Clipping-module and battery switch LD 200N200 EM TEST
Load Dump Generator with Clipping-module and battery switch LD 200N100 EM TEST
Load Dump Generator with Clipping-module LD 200N EM TEST
Ultra Compact Simulators for Automotive Transients UCS 200N EM TEST