Accuracy (from applied pressure):
±1,5 % + 1 Pa
(including: general accuracy, temperature drift, linearity,
hysteresis, long term stability, and repetition error)
Thermal effects:
Temperature compensated across the full spectrum of
capability
Overpressure:
Proof pressure: 25 kPa
Burst pressure: 30 kPa
Zero point calibration:
Automatic autozero or manual pushbutton
Response time:
4.0 s or 0.8 s, selectable via jumper
Media compatibility:
Dry air or non-aggressive gases
Measuring units:
Pa, kPa, mbar, inchWC, mmWC, psi, selectable via
jumper
Measuring element:
MEMS
Environment:
Operating temperature: -10…50 °C
Storage temperature: -20…70 °C
Humidity: 0 to 95 % rH, non condensing
Dimensions:
Case: 90.0 x 95.0 x 36.0 mm
Weight:
150 g
Mounting:
2 each 4.3 mm screw holes, one slotted
Materials:
Case: ABS
Lid: PC
Duct connectors: ABS
Tubing: PVC
Protection standard:
IP54
Display (Optional):
2-line display (12 characters/line)
Line 1: active measurement
Line 2: units
Electrical connections:
4-screw terminal block
Wire: 12–24 AWG (0.2–1.5 mm2)
Cable entry: M16
Pressure fittings:
Male Ø 5,0 mm and 6,3 mm
+ High pressure
− Low pressure
Voltage:
Circuit: 3-wire (V Out, 24 V, GND)
Input: 24 VAC or VDC, ±10 %
Output: 0–10V
Power consumption: <1.0 W
Resistance minimum: 1 kΩ
Current:
Circuit: 3-wire (mA Out, 24 V, GND)
Input: 24 VAC or VDC, ±10 %
Output: 4–20 mA
Power consumption: <1.2 W
Maximum load: 500 Ω
Conformance:
Meets the requirements for CE marking:
EMC Directive 2014/30/EU
RoHS Directive 2002/95/EY