Feature:
Can support up to six probes for TOFD, phased array, or pulse-echo inspections
Constant scanning speed control for smooth data acquisition at any speeds
Compact motion controller allowing 10 different scan speeds from 5 mm/s to 50 mm/s
Simple two-button remote control for jog or constant encoded motion either in backwards or forward direction
Data acquisition using OmniScan or TomoScan FOCUS LT instrumentation with less than 5 minutes configuration time
The four industrial-strength magnetic wheels are driven for use on ferromagnetic surface
Integrated water manifold for simple and efficient couplant delivery
Emergency-stop button located on the scanner
Laser guide indicator helps the operator to follow the weld centerline or any other inspection reference
Room to integrate a remote pulser/preamplifier for improved TOFD-P/E inspections
Divisible cable conduit umbilical offers cable protection and configuration flexibility. Minimal time needed for probe reconfiguration.
Waterproof (IP65)
1 Interface with TomoScan FOCUS LT™ can be made using the optional encoder cable adaptor
Specification:
Scanner speed: 5 mm to 50 mm per second
Encoder resolution: 2100 steps/mm (typical)
Power consumption: 90 W
Maximum input current: 4 A
Voltage: 24 VDC
Power supply input voltage: 100 VAC or 240 VAC, autoswitching
| Component |
Length (mm) |
Width (mm) |
Height (mm) |
Weight (kg) |
| Scanner with long bar and 6 probes |
430 |
340 |
175 |
12.0 |
| Scanner with small bars and 4 probes |
380 |
200 |
175 |
11.0 |
| MCDC-01 motion controller |
175 |
110 |
60 |
1.5 |
| Power supply |
200 |
85 |
50 |
1.0 |
| Remote control |
230 |
50 |
90 |
0.8 |
Standard inclusions
- Motorized scanner with rotating probe-holder arms at the front and back of the scanner
- 2 frame bars for probe-holder fixation of 200 mm (8 in.) and one of 340 mm (13.4 in.)
- Remote control with 5 m cable
- MCDC-01: one-axis DC motion controller
- Encoder cables linking MCDC-01 to the OmniScan®
- 6 spring-loaded arms (SLA) pivoting probe holders and all brackets needed for the different configurations
- 4 TOFD-P/E 31.75 mm yokes
- 2 PA 40 mm x 55 mm yokes
- 2 PA 40 mm x 65 mm yokes for PWZ1 probes
- Irrigation tubing and fittings
- Laser guide and holder
- Two steering lever
- 5 m divisible conduit for cable protection and attachment to the scanner.
- Power supply
- Scanner and accessories hard carrying case
Note: All cables for scanner operation are 5 m.
Probes and wedges are not included with the scanner.