Feature:
Well suited for phased array UT, conventional UT, and eddy current inspection techniques using one probe
Compatible with the OmniScan, the TomoScan FOCUS LT (with optional adapter), and other instruments using the appropriate encoder cable.
Two axes with waterproof encoders for position-encoded X-Y scans
Axis positioning with minimal backlash
Both modules are mounted on bearings for precise and smooth displacement
Two pivot-equipped mounting pods enable surface following
Locking devices allow each axis to be locked
Module displacement can be in increments of 3.27 mm or in free-running mode
The probe holder is mounted on a bearing-arm system that can be spring loaded if needed.
Aluminum frame is used for lightweight and rust-free components
Sliding Y-axis provides greater scan flexibility and improved portability
Specification:
Weight: 5 kg to 8 kg, depending on the configuration
Suction-cup pod holding force: 7 kg per cup
Magnetic-pod holding force: 81 kg per base
Encoder resolution: 13 steps/mm (±0.15 step/mm), 330 steps/in. (±0.006 steps/in.)
Encoder connection: DE-15 to 2 LEMO 90°
Minimum curvature for partial scans: 50 cm (20 in.), outside diameter
| Model |
X (length)
mm (in.) |
Y (width)
mm (in.) |
Z (height)
mm (in.) |
| GLIDER 18×18 |
700 (28) |
690 (27) |
152 (6) |
| GLIDER 24×24 |
900 (35) |
845 (33) |
152 (6) |
| GLIDER 36×36 |
1200 (47) |
1150 (45) |
152 (6) |