- 2ch inputs
Calculation and judgment outputs can be made for 2ch input values of strain gauge type sensors. Calculated value is displayed on the main display, and ch1 and ch2 input values are displayed on the sub display.
- Calculation functions
- ch1 + ch2: The ch1 value and ch2 value are added.
- ch1 – ch2: The ch2 value is subtracted from the ch1 value.
- |ch1 – ch2|: The absolute value of the difference between the ch1 value and ch2 value is calculated.
- High select: The ch1 value or ch2 value, whichever is larger, is selected.
- Low select: The ch1 value or ch2 value, whichever is smaller, is selected.
- 9 points of judgment outputs are equipped.
- Calculation value: HI, OK, LO
- ch1 value: HI, LO, Alarm output
- ch2 value: HI, LO, Alarm output
- Sampling speed as high as 3000 times/sec on each channel
Including the high-speed CPU that allows processing from sensor inputs to outputs at 3000 times/sec, F350 captures necessary points reliably. (The speed can be switched to 300 times/sec)
- Digital zero & digital offset
The indicated value can be zeroed by key operation. F350 is also equipped with the function of subtracting a set value from the indicated value. This function is convenient in the case where a no-load condition cannot be set up or for offsetting.
- Analog monitor output
Voltage in proportion to the input signal, which is useful for recording with a recorder, etc., can be output on each channel.
- HI/LO limit comparison function with hysteresis
Timing at which HI/LO limit comparison is made can be provided with a margin. This function is effective to prevent chattering, etc.
Thông số kỹ thuật
Xem thêm: Bộ hiển thị lực F325 Unipulse