Instrument dimensions
|
13.1 x 7.0 x 5.2 cm (5.1 x 2.8 x 2.0 in.)
|
Weight
|
300 g (10.6 oz.)
|
Operating temperature
|
-20°C to +50°C (-4°F to +122°F)
|
Storage temperature
|
-40°C to +60°C (-40°F to +140°F)
|
Operating humidity
|
10% to 100% relative humidity (non-condensing)
|
Dust and moisture ingress
|
IP666/67
|
Alarm setpoints
|
May vary by region and are user-defined
|
O2 measuring principle
|
Capillary controlled concentration sensor
|
Alarm conditions
|
TWA alarm, STEL alarm, low alarm, high alarm, multi-gas alarm, over limit (OL) alarm, low battery alarm, confidence beep, automatic deactivation alarm, pump alarm
|
Audible alarm
|
95 dB+ at 30 cm variable pulsed beeper with full battery charge
|
Visual alarm
|
Red light-emitting diodes (LEDs)
|
Display
|
Alphanumeric liquid crystal display (LCD)
|
Backlight
|
Activates upon startup and when the pushbutton is pressed; deactivates after 10 seconds. Activates during an alarm condition and remains lit until alarm ceases
|
Self-test
|
Initiated during activation, self-test runs continuously while detector is operational
|
Calibration
|
Automatic zero and automatic span
|
User field options
|
Startup message, lockout on self-test error, safe mode, confidence beep, latching alarm, force calibration, cal IR lock, force bump, location logging, force block test, set datalog interval, set confidence interval, language selection.
|
Sensor Options
|
Sensor enable/disable, set span concentration values, set calibration interval, set bump interval, set alarm setpoints, set STEL interval, set TWA period, auto zero at startup enable/disable, 5% overspan, low alarm acknowledge, oxygen measurement, and combustible gas measurement
|