- The Eastman combination laser and cutting system offers a laser for cutting fabrics that require a fused edge as well as the proven, reliable technology of Eastman’s static cutting table. The tool head is equipped with a 200 watt gas assist laser (100 watt optional), three individually aligned and calibrated tool spindles, and a pneumatic pen/marker holder.
- The static table system is available in a range of system lengths and widths to meet the demands for prototypes, one-offs and full-production runs. The system’s high-precision configuration features multi-axis motion for more defined and accurate cuts. Material is spread across the static table by an operator.
+ Cut, mark, punch and seal edges all on one system
+ Laser provides cintered edge to prevent fraying – great for materials like nylon and other materials that unravel.
+ Single gantry design offers three cutting tools, a laser and a marking tool, minimizing switchover time between material files and set up. (Laser and blade cutting cannot be performed simultaneously).
+ 200 watt laser has no contact with the fabric, improving the quality and speed of the cut
+ Adjustable laser power within software, reducing unnecessary operating costs
Thông số kỹ thuật
- Width : 72 in. (1.82m) 78 in. (1.98 m) Please contact the factory for active cutting zone dimensions. Custom widths available, please contact the factory for more information.
- Length : Up to 100ft. (30m) Please contact the factory for active cutting zone dimensions. Custom lengths available, please contact the factory for more information.
- Electric - Control Power/PC : 230V, 3 ph, 50/60 Hz, 30 amps
- Electric - Vacuum Blower : 208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional
- Power: Pneumatic : 75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm)
- Maximum Laser/Plotting Speed : Material and table length dependent.
- Compressed Air Consumption : 15 CFM
- Sound Level : <75 db(A)
- Operating Temperature : 55 – 100°F (12 – 37°C)
- Humidity : 20 – 80% (non-condensing)
- Disclaimer : Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.