Trang chủ Thiết Bị Đo Lường Quân Sự Đo kiểm quang học - quang vật lý Thiết bị hãng Trioptics

ATS 200 - The First Alignment Turning Station with Fully Integrated Measurement Technology

Mã sản phẩm: ATS 200 |
Thương hiệu: Trioptics

Giá bán: Liên hệ

The ATS 200 was developed with the aim of simplifying the alignment machining of mounted lenses for the user.

Yêu Cầu Giá Tốt

Zalo/tell: 0984.843.683

Email: hien@ttech.vn

Thông tin sản phẩm

The ATS 200 is a combination of a compact and extremely stable turning machine and TRIOPTICS' proven centration measurement device, the OptiCentric®. The ATS 200 is used to machine lens mounts so that the symmetry axis of the mount coincides with the optical axis of the lens assembled in the mount.

The integrated sensors increase the accuracy of the ATS 200

Using an integrated sensor, both the front and rear contact surfaces of the mounted lens can be measured with high precision and then machined. Air gaps between the lenses can be adjusted with high accuracy. The combination of turning machine and centration measurement technology means it is possible to manufacture mounted lenses with a centration error of less than 1 µm.

Key Features

NEW: Choice between two kinds of spindles:
- Aerostatic spindle with a typical run out error <0.15 µm
- Hydrostatic spindle for heavy cells, hard materials and larger infeed with a typical run out error of <0.2 µm
NEW: Automated plano-calotte alignment chuck for the precise alignment of the mounted lens
Best specification for alignment turning of lenses up to 200 mm diameter
Widest range of applications in the class for mounted lenses up to 200 mm diameter: Spherical, aspherical and infrared lenses, measurement of center thicknesses and flange surfaces
Integral measurement technology: mechanical and optical distance sensors, OptiSurf® low-coherence interferometer, second autocollimator
Intuitive Usage: One software solution for all measurement and machining processes
Optimized granite setup increases rigidity and thermal stability in the working area
Advantages of the vertical setup: Prevents the spindle causing a tilting moment during machining, reduced footprint, convenient loading and unloading
Wear-free, aerostatic axes guarantee highest accuracy

The automated alignement chuck aligns the optical axis of the mounted lens with respect to the rotation axis

The ATS 200 AspheroCheck-Module measures the position of the asphere axis with respect to the rotation axis. Then the alignment chuck aligns the asphere axis with respect to the rotation axis.

Applications

The alignment turning procedure has a very broad range of applications, from the smallest lenses used in microscope optics through to lenses for i-line steppers. The ATS 200 and ATS 400 alignment turning stations allow the manufacturing of almost all types of mounted lenses:

Lenses for stepper optics
Lenses for microscope and endoscope optics
Mounted infrared lenses for safety applications
Mounted aspherical lenses
Lenses and components for high-quality digital camera lenses
Lenses which cannot be glued in cell, e.g. for space applications
Imaging optics for UV applications
Optical assemblies with very high accuracy requirements

* All figures for brass cells with a diameter of 150 mm

	ATS 200*
Machine type	Vertical CNC turning machine with 3 aerostatic precision axes and integrated measurement systems
Measurement system	based on OptiCentric® optional: OptiCentric® Dual
Workpiece diameter	typical 20-150 mm, optional 0-200 mm
Maximum sample weight	5 kg
Workpiece material	Diamond machinable non-ferrous metals (in particular brass, aluminum, NiPcoated steel)
Achromats	Yes
IR lenses	Yes, by infrared measurement head or OptiCentric® Dual
Aspheres	Yes, optional
Remaining centration error after machining	< 1 µm
Concentricity of the cell after machining	< 1 µm