|
Flow Range
|
1000 to 5000 ml/min (5 to 500 ml/min requires optional low flow kit) |
|
Compensation Range
|
5000 ml/min at 10 inches water back pressure
4000 ml/min at 20 inches water back pressure
2000 ml/min at 50 inches water back pressure |
Typical Back Pressure of Sampling Media (inches water)
| Flow Rate (L/min) |
1.0
|
1.5
|
2.0
|
2.5
|
3.0
|
3.5
|
4.0
|
5.0
|
| Filter/Pore Size (µm) |
|
|
|
|
|
|
|
|
| 25-mm MCE/0.8 |
6
|
9
|
12
|
15
|
18
|
21
|
25
|
31
|
| 25-mm MCE/0.45 |
14
|
22
|
28
|
35
|
40
|
44
|
50
|
63
|
| 37-mm MCE/0.8 |
2
|
3
|
4
|
5
|
6
|
7
|
9
|
11
|
| 37-mm PVC/5.0 |
1
|
1
|
2
|
2
|
2.5
|
3
|
3
|
4
|
| 37-mm polycarbonate/0.45 |
4
|
6
|
8
|
10
|
12
|
15
|
17
|
21
|
| 25-mm MCE/0.45 microvacuum |
21
|
31
|
40
|
48
|
59
|
69
|
79
|
100
|
| 37-mm PTFE/1.0 |
1.5
|
2.5
|
4
|
5.5
|
7
|
8
|
9.5
|
12
|
Compare the information in this table to pump compensation range to determine appropriate applications.
|
|
Flow Compensation System
|
Patented isothermal closed loop flow sensor
(U.S. Patent No. 5,892,160) |
|
Tubing
|
Requires 1/4-inch ID tubing |
|
Accuracies
|
Timing: 1 min/mo at 25 C
Flow Rate: ± 5% of set-point after calibration to desired flow |
|
Battery Charge Level Indicator
|
Icon displays on LCD at full, mid, low charge, imminent low battery fault, and low battery fault. |
|
Temperature Range
|
Operating: 32 to 104 F (0 to 40 C)
Charging: 32 to 113 F (0 to 45 C)
Storage: -4 to 95 F (-20 to 35 C) |
| Typical Run Times |
XR5000 Model
|
2 L/min
|
5 L/min
|
|
High-power Li-Ion
|
40 hrs
|
22 hrs
|
|
Standard Li-Ion
|
20 hrs
|
11 hrs
|
|
Timer Display Range
|
1 to 9999 minutes (6.8 days). If run time exceeds 6.8 days, timer display rolls over. |
|
Flow Fault
|
If pump is unable to compensate for > 15 seconds due to excessive back pressure, the pump stops and holds run time display. Auto-restart is attempted every 15 seconds up to 5 times. |
|
Low Battery Fault
|
15 sec to sleep |
|
Auto-off
|
5 min of inactivity |
|
Battery Pack
(model dependent)
|
High-power Li-Ion (4 cell), rechargeable, 7.4 V, 4.4 Ah, 32.6 Wh capacity
or
Standard Li-Ion (2 cell), rechargeable, 7.4 V, 2.2 Ah, 16.3 Wh capacity |
|
Battery Recharge Time
(with SKC-approved charger)
|
Standard Li-Ion (2 cell): approximately 4 hrs
High-power Li-Ion (4 cell): approximately 8 hrs |
|
Size
|
High-power Li-Ion model: 5.5 x 3 x 2.3 in (14 x 7.6 x 5.8 cm)
Standard Li-Ion model: 4.3 x 3 x 2.3 in (10.9 x 7.6 x 5.8 cm) |
|
Weight
|
High-power Li-Ion model: 21 oz (0.6 kg)
Standard Li-Ion model: 16 oz (0.45 kg) |
|
Case
|
Anti-static plastic |
|
RFI/EMI Shielding
|
CE marked for RFI/EMI protection |
| Approvals |
 for use in hazardous locations. Models that are UL Listed for intrinsic safety contain the logo on the label. These models must be used with battery pack Cat. No. P85004 or P85002 to maintain the UL intrinsic safety listing.
RoHS compliant
|