Vertical Bushing 7022/6000 series Measurements International

Mã sản phẩm: 7022/6000 series |
Thương hiệu: Measurements International

Giá bán: Liên hệ
Vertical Bushing
Model: 7022/6000 series
Hãng: Measurements International

Yêu Cầu Giá Tốt

Thông tin sản phẩm
The Model 7022/6000 series of High Voltage Current Transformers was designed for the current input to MI’s ALMS 4300 Loss Measurement Systems. This design meets the requirements of both CEI/IEC 44-1 and IEEE STD C57.12.00-2000. The bushing is filled to approximately 72 PSI absolute of SF6 and is fitted with a pressure indicator or with an optional pressure transducer with a 4-20 mA output for continuous monitoring. Connections to the primary winding of the current transformer are made via a copper bar, machined at both ends. Utilizing passive two stage compensated technology, errors of less than 10 ppm can be achieved at high voltages.


The main advantage of a two stage compensated CT is that the effective burden is 0 when feeding into another compensated CT such as the current input on the Model 2010A Wattmeter. As a result, the errors of the CT are effectively reduced to zero in both magnitude and phase. Lead length becomes unimportant and there is no further concern for any additional active components. If the 7022/6000 is connected to a wattmeter that has only a two wire input, the secondary and auxiliary leads must be connected together as close as possible to the input of the wattmeter. Typical errors for burdens at 1Ω are less than 100 ppm. For more accurate data on errors related to burdens above 100 mΩ contact the factory.

Thông số kỹ thuật

cach-chon-7022-6000-series-chinh-hang

>>> Thông tin mới nhất về dòng 7022/6000 series

SẢN PHẨM CÙNG DANH MỤC