Thiết bị thử nghiệm máy phát UIG-50-500 KEP

Mã sản phẩm: UIG-50-500 |
Thương hiệu: KEP

Giá bán: Liên hệ
Generator tester UIG-50-500 designed for testing the dielectric strength of the windings of generators, conductors by line frequency AC voltage and measurements current leakage rectified voltage according to the requirements of the "Regulations for Electrical" and RD 34.45-51.300, with a maximum power to the load up to 500 kVA.

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Technical Specifications

    • Parameter Value 
      Supply voltage 3-phase AC (50 Hz), V 380 ± 38
      Consumption power, kV∙A, max  50
      Continuous operation at maximum capacity, min, max   20
      Break after continuous use, min, min 
      Output power, kV∙A  500
      Capacitance range of objects test, uF 0,01 – 0,7
      Q-factor, min 40
      Greatest operating voltage AC test mode stator winding, kV  42
      Greatest operating voltage AC test mode trunking, kV  55
      Greatest operating voltage of the rectified current-leakage test, kV  70
      Reduced error measuring current and voltage, max, % 
      Threshold current protection high-voltage side, A 
      Threshold protection low-voltage side, max, A 
      Dimensions L × W × H, mm  1970 × 1570 × 2200
      Warranty life, h 
      Weight, kg, max

    • Operating Conditions

      The device is designed for an indoors operation under the following conditions:

      Condition Value
      Air temperature, °С from +1 to +35
      Relative humidity, %, up to
      80 at +25 °С
      Atmospheric pressure, kPa (mm hg)
      84,0 – 106,7 (630 – 800)