Thiết bị thử nghiệm máy phát UIG-35/70/100-300 KEP

Mã sản phẩm: UIG-35/70/100-300 |
Thương hiệu: KEP

Giá bán: Liên hệ
Generator tester UIG-35/70/100-300 designed for testing the dielectric strength of the generators windings, bus systems by line frequency AC voltage, test leakage on rectified voltage in accordance with the requirements of "Regulations for Electrical" and RD 34.45-51.300, with a maximum load capacity of up to 300 kVA.

Yêu Cầu Giá Tốt

Thông tin sản phẩm
  • Technical Specifications

  • Parameter Value
    Nominal voltage AC power, V

    380 ± 38

    Frequency, Hz 50 ± 1
    Maximum output AC voltage, KV (load up to 0.8 uF)
    The largest output AC voltage, KV (load up to 0.03 uF) 70
    The largest output DC voltage, kV 100
    The maximum output power, min, kVA 300
    Consumption power, max, kVA 
    Maximum load capacity, uF (at 7.5 kV) 0,8
    The quality factor, min 30
    The rate of rise of the test voltage, max kV/s (the speed is set in the settings) 1
    The maximum operating current on the high side, A 9
    The current consumed by the low voltage side, no more, A 120
    The relative error measured. ranging from 10% - 100%, max, % 
    The accuracy of the output voltage, %, not worse 3
    Continuous operation at maximum power, min 20
    Break after continuous, min, min 40
    Dimensions W × D × H, mm 2100×1500×1000
    Weight, kg 1500

  • Operating Conditions

    The device is designed for an indoors operation under the following conditions:

    Condition Value
    Air temperature, °С from +1 to +35
    Relative humidity, %, up to
    80 at +25 °С
    Atmospheric pressure, kPa (mm hg)
    84,0 – 106,7 (630 – 800)