| Accuracy | 
            ±0.1% FS with option LDM80-KL01;  ±0.2% without this option | 
        
        
            | Internal resolution | 
            65,000 digits | 
        
        
            | Measuring rate (if digital filter is set to zero) | 
            10 per second (every 100 ms a measurement) | 
        
        
            | Filter | 
            Programmable digital filter (for stabilisation of displayed values also at fluctuating pressure values etc.) | 
        
        
            | Temperature measurement | 
            Resolution 0.1°C, Accuracy ±1°C (Range -10...+70°C, ambient temp. 0...50°C) | 
        
        
            | Reference temperature | 
            + 23 ° C | 
        
        
            | Working temperature | 
            -10 ... + 70 ° C | 
        
        
            | Storage temperature | 
            -10 ... + 80 ° C | 
        
        
            | Temperature influence | 
            ≤ ± 0.002 ° C / 1 ° C | 
        
        
            | Display | 
            LCD, figures height 13 mm, programmable backlight | 
        
        
            | Programmable resolution | 
            1, 2, 5, 10 | 
        
        
            | Interface | 
            USB 2.0 (on PC side virtual COM port, adjustable baud rate 19200, 9600 or 4800) 
            OPTIONAL: WIRELESS 433 MHz, RF transmission 200 m in free air, max. 10 transmissions per sec. | 
        
        
            | ZEROing | 
            Via key press, up to 50% FS | 
        
        
            | Maximal/minimal values | 
            PEAK-functions, active for positive or negative pressure, 10 measurements per sec. | 
        
        
            | Pressure units (selectable) | 
            bar, mbar, psi, kPa, kg/cm², mHg, mmHg, mmH2O, mH2O | 
        
        
            | Temperature units (selectable) | 
            ° C, ° F | 
        
        
            | Data logger | 
            max. storage frequency 1 value per second; Capacity max. 60,000 values 
            (60,000 pressure values or 30,000 pressure values plus 30,000 temperature values) | 
        
        
            | Supply | 
            Built-in Lithium-Ion battery 3.7 V (size 14500, up to about 3 months autonomy without charging, if backlight is set to zero and without data transmissions. Charging time apporox. 8 hours (via PC/Laptop or supplied USB charger)). | 
        
        
            | Pressure port | 
            1/2" BSP male thread, recommended seal: USIT A 63-18; Pressure ranges > 1000 bar: via optional double sealing cone 60° (Order-Code TLDMM-DK) | 
        
        
            | Pressure limits | 
            Static pressure 100% FS, max. permissible pressure up to 150% FS, burst pressure >300% FS; at highly dynamic pressure max. 75% v.E. | 
        
        
            | Pressure port mounting | 
            Tightening wrench 27 mm, tightening torque 28 Nm | 
        
        
            | Protection degree | 
            IP 40 | 
        
        
            | Materials | 
            Indicator housing: black coated aluminium, pressure sensor and port: stainless steel |