Thông tin sản phẩm
Pressure & Flow Calibrator
In calibration mode the FCO560's multiple sensor configurations allow different external references to be used quickly and simply. When combined with laminar flow elements, the FCO560 may be used as a flow calibrator covering flows from less than 1 ml/min to over 30000 l/min. An external pressure sensor may also be used as a reference for calibrating pressures much higher than the FCO560’s differential pressure range.
When used for site calibrations, the FCO560 may be preconfigured with information for up to 99 different instruments to be calibrated. For bench use, these configurations are useful for rapidly changing between commonly used setups.
Additional features:
Pressure control stability <0.003 % FS
Simultaneous display of applied pressure/flow and EUT values
Voltage and current inputs for EUT signal
4-20mA inputs for external temperature and pressure transducers
PT100 temperature sensor input
Internal absolute pressure sensor
Battery powered for portable calibration
Precision Manometer
The FCO560 is a versatile and highly-accurate flow and pressure measurement device, with an accuracy of greater than 0.1 % of reading at pressures down to 1 Pa. The instrument is widely used in a variety of applications, such as fan manufacture and wind tunnel operation, and is able to automatically compensate for temperature and local pressure variations.
Additional features:
Atmospheric pressure compensation with internal sensor, external sensor, or preconfigured constant value
Flow readings as volume flow, mass flow, velocity, or power
Extensive list of pre-configured gases, as well as customisable density setting
Graphical output showing peak flow and trends.