Máy gia nhiệt vòng bi SKF TIH 100M/230V
Specifications
    
        
            | General Specification | 
        
            | SKF m20 performance | 97 kg (213 lb) | 
        
            | Voltage, V/Hz |  | 230V/50-60Hz | 
        
            | 
 | 400-460V/50-60Hz | 
        
            | Work piece | Maximum weight | 120 kg (264 lb) | 
        
            | Maximum bore diameter | 20 - 400 mm (0.8 - 15.7 in.) | 
        
            | Temperature control | Range | 0 - 250 °C (32 - 482 °F) | 
        
            | Magnetic probe | Yes, K-type | 
        
            | Accuracy (electronics) | ± 2 °C (± 3,6 °F) | 
        
            | Time control | Range | 0 - 60 minutes | 
        
            | Accuracy | ± 0,01 sec. | 
        
            | Maximum temperature (approx.) | 400 °C (750 °F) | 
        
            | Thermometer mode | Yes | 
        
            | Bearing mode | Yes | 
        
            | Power reduction | 2-step; 50 - 100% | 
        
            | Demagnetisation according to SKF norms (automatic) | Yes (<2 A/cm) | 
        
            | Can heat sealed bearings | Yes | 
        
            | Can heat pre - greased bearings | Yes | 
        
            | Error guiding codes | Yes | 
        
            | Thermal overload protection | Yes | 
        
            | Maximum magnetic flux | 1,7 T | 
        
            | Control panel | Key board with LED in remote control | 
        
            | Operating area (w × h) | 155 × 205 mm (6.1 × 8.0 in.) | 
        
            | Coil diameter | 110 mm (4.3 in.) | 
        
            | Dimensions (w × d × h) | 570 × 230 × 350 mm (22.4 × 9.0 × 13.7 in.)
 | 
        
            | Total weight, including yokes | 42 kg (92 lb) | 
        
            | Maximum power consumption | 3,6 kVA (230V) | 
        
            | Number of standard yokes | 3 | 
        
            | Standard yokes | 56 × 56 × 296 mm (2.2 × 2.2 × 11.7 in.), for heating bearings with bore diameter of 80 mm (3.1 in.) and larger | 
        
            | 28 × 28 × 296 mm (1.1 × 1.1 × 11.7 in.), for heating bearings with bore diameter of 40 mm (1.6 in.) and larger | 
        
            | 14 × 14 × 296 mm (0.6 × 0.6 × 11.7 in.), for heating bearings with bore diameter of 20 mm (0.8 in.) and larger | 
        
            | Core cross section | 56 × 56 mm (2.2 × 2.2 in.) | 
        
            | Yoke storage | Yes, foldable | 
        
            | Sliding arm | No | 
        
            | Swivel arm | Yes, large yoke only | 
        
            | Cooling fan | No | 
        
            | Housing material | Steel and glass filled polyamide | 
        
            | Warranty period | 3 years | 
    
Công ty CP Công Nghệ Đỉnh Cao
 
Trụ sở: Số 12 Chân Cầm, Hàng Trống, Hoàn Kiếm, Hà nội
 
VPGD: Phòng E2, Tòa nhà C4, Đường Đỗ Nhuận, Xuân Đỉnh, Từ Liêm, Hà nội
 
Tel: +84 (4) 22428148; Cel: 0984843683,Fax: +84 (4) 37505143
 
VPGD: Tầng 19, Tòa nhà Indochina/ Số 4, Nguyễn Đình Chiểu, P.Đakao, Q.1, 
 
TP Hồ Chí Minh..
 
Tel: 08.6685 8911 Fax: 08.6284 0993.
 
Website: www.ttech.vn, www.store.ttech.vn, www.tshops.vn, www.stock.ttech.vn, http://www.omega-air.vn/