| Measuring range*1 |
0.20~78.60 cN-m |
0.020~7.860 N-m |
| 0.020~8.000 kgf-cm |
0.20~80.00 kgf-cm |
| 0.020~6.970 lbf-in |
0.20~69.70 lbf-in |
| - |
2.0~786.0 cN-m |
| Accuracy |
+/- 0.5% (reading value) or +/-3digit in less than 499 digit. |
| Display |
4 digits LCD display |
| Measuring direction |
CW-CCW (Right turn /Left turn) |
| Measuring mode |
P-P(Peak-hold), T-R(Track), P-D(Peak-down),C(real time data output) |
| Upper/Lower value setting |
Upper/ Lower value are able to be set in the measuring range. |
| Pass-fail decision |
Pass/Fail can be check in the measuring range.(P-P mode) |
| GOOD (Pass)…Green lights, NG( Fail)…Red blinks |
| Max./ Min./Ave. display |
Display stored Max. / Min. /Ave. / Number of measuring values. |
| Real time data output |
Output applied torque approx. 1/180 sec each. |
| Internal memory |
800 data |
| Output data |
ASCII (baud rate 19200 bps) |
| Auto zero reset function |
Automatic clear value function in each 0.1~3.0 sec (The setting is possible from 0.5 sec each). Manual zero reset setting is at 0.0 sec. |
| Zero Reset function |
Auto or Manual (only pressing the button.) |
| Battery |
Ni-Cd 1.2v×5 cell(700mAh) 300 times |
| Auto power-off |
Auto power-off in 10 minutes with no operation. |
| Charging time/ Usable time |
Approx.3 hours/ Approx. 12 hours continuous use after full charge. |
| Socket joint part (Detecting parts shape) |
Square 20 mm / Square 9.5 mm |
| Included items (1 each) |
Driver adapter OW-025/OW-10 |
Driver adapter OW-20/OW-60 |
| Attaché case, battery charger, inspection certificate (*2), calibration certification (*2), traceability system diagram(*2). |