Measurement quanities - Time (nanoseconds), Elongation, Load, Stress, and %Strain.
Display Options - RF, Rectified, Large Digits with Limits Bar.
Display Resolution - 1/8" VGA 240 x 160 pixels.
Stores 8000 readings and waveforms in multiple groups.
The first cost effective ultrasonic solution available on the market.
Effectively monitor your bolts during periodic shutdowns over the service life of the fastener.
Visually compare the unloaded to the loaded waveform.
Built-in Linear regression or vector for optimizing load measurements.
The Auto Set feature automatically optimizes detection and adjusts display.
Hi/Lo alarm tolerance limits work in conjunction with the data port and external pump shut-off device.
Thông số kỹ thuật
Physical
Size:
Width (2.5in/63.5 mm)
Height (6.5 in/165 mm)
Depth (1.24 in/31.5 mm)
Weight: 13.5 ounces (with batteries).
Keyboard: Membrane switch pad with twelve tactile keys.
Operating Temperature: 14 to 140F (-10C to 60C)
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
Display: 1/8in VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8in (62 x 45.7mm). EL backlit (on/off/auto).
Ultrasonic Specifications Measurement Modes:
Pulse-Echo (standard)
Pulse-Echo w/Gate (fine adjust)
Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
Receiver: Manual or Auto Set gain control with 40dB range.
Timing: 10 bit 250 MHz digitizer.
Warranty: 2 year limited
Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Auto power off if idle 5 min.
Battery status icon.
Measuring Range: From 1” to 48” (25.4mm to 122cm) bolts.
Time - Nanoseconds.
Elongation - Change in length (inches/millimeters).
Load - Force load applied (pounds kIP or kN Killonewtons).
Stress - Force for unit area stress applied (pounds kPSI or megapascals MPa).
Strain % - percentage strain applied (inches per inch or millimeters per millimeter)
Resolution: +/- .00001 inches (0.0001 mm)
>> Sản phẩm tham khảo UMX-2