Máy đo biên dạng - MarSurf XCR 20 - Mahr

Mã sản phẩm: MarSurf XCR 20 |
Thương hiệu:

Giá bán: Liên hệ

Máy đo biên dạng

Model : MarSurf XCR 20

Hãng sản xuất : Mahr

Liên hệ hỗ trợ: 0984.843.683, 

Email: info@ttech.vn

Thông tin sản phẩm

Máy đo biên dạng

Model : MarSurf XCR 20

Hãng sản xuất : Mahr

Roughness and contour measurement at a measuring station with MarSurf XCR 20
This combined measuring station allows both surface roughness and 
contour measurements to be performed at a single measuring station.
Depending on the measuring task, either the GD 25 drive unit for surface roughness measurements or the PCV drive unit for contour measurements can be activated.
The two measuring systems are fixed to the measuring stand by means of a combi holder.
  • Space-saving design: the two drive units can be adapted by means of the corresponding combi holder to MarSurf ST 500 or ST 750 measuring stands
  • Roughness and contour evaluation from a single measurement
  • High-precision contour and roughness evaluation on components requiring a long stroke and very high resolution with the MarSurf LD 130 / LD 260 measuring system
  • Quick changeover between roughness and contour measurement simply by switching within the software platform and swapping mechanical components such as the drive unit and probe
  • Technical data
  • Applications
  • Options
  • Versions
  • Shipment
Resolution

In Z, relative to stylus tip:
0.38 µm (350 mm probe arm) / 0.19 µm (175 mm probe arm)

In Z, relative to measuring system:
0.04 µm

Sampling angle
on smooth surfaces, depending on deflection:
trailing edges up to 88°, leading edges up to 77°
Start of traversing length (in X)
0.2 mm
Tip radius
25
Contacting speed (in Z)
0.1 to 1 mm/s
Probe arm length
175 mm, 350 mm
End of traversing length (in X)
200 mm
Positioning speed
In X and return speed: 0.2 to 8 mm/s
In Z: 0.2 to 10 mm/s
Guide deviation
< 1 µm (over 200 mm)
Measuring speed
0.2 mm/s to 4 mm/s
Measuring principle
Stylus method
Probe
R probe, MFW 250
Optical probe Focodyn*, LS 1*, LS 10*
(*only in conjunction with PGK or GD 120 CNC drive unit)
Measuring range mm
(in Z) 50 mm
MFW 250: ±25 µm, ±250 µm, (up to ±750 µm); ±1000 µin, ±10,000 µin (up to ±30,000 µin)
Traversing lengths
Automatic; 0.56 mm; 1.75 mm; 5.6 mm; 17.5 mm, 56 mm,
(.022 / .070 / .224 / .700 / 2.240 in),
Measurement up to stop, variable
Number n of sampling length according to ISO/JIS
1 to 50 (default: 5)
Measuring force (N)
1 mN to 120 mN, below and above
(can be set in MarSurf XC 20)


SẢN PHẨM CÙNG DANH MỤC