Máy đo biên dạng - MarSurf XC 20 - Mahr

Mã sản phẩm: MarSurf XC 20 |
Thương hiệu:

Giá bán: Liên hệ

Máy đo biên dạng

Model : MarSurf XC 20

Hãng sản xuất : Mahr

Liên hệ hỗ trợ: 0984.843.683, 

Email: info@ttech.vn

Thông tin sản phẩm

Máy đo biên dạng

Model : MarSurf XC 20

Hãng sản xuất : Mahr

The MarSurf XC 20 is recognized as the ultimate in contour evaluation. What started some 30 years ago with the Konturograph - consisting of a drive unit and X-/Y-recorders #96 has developed into a top-quality contour measuring system using cutting-edge technology. The finely tuned device configuration offers superb performance standards. The drive unit and the measuring stand are controlled and positioned via the reliable measuring and evaluation software.
  • User prompts can be displayed
  • Interactive control elements support evaluations and automatic routines
  • Measurement of upper and lower contours with a twin-stylus probe; a relative evaluation of the two contours is also possible
  • Profile section images, with evaluation of different parameters for each section
  • Segmented measurement is possible across obstacles such as bores or steep sides
  • Import and export of dxf files supported for setpoint/actual value comparison
  • PCV 200 drive unit with patented probe arm fixing for reproducible probe arm change without tools
  • Patented probe system for measuring station flexibility
  • Manually variable tracing forces also support flexibility
  • Synthetic creation of nominal profiles from straight lines and circle arcs
  • Easy comparison of nominal and actual profiles Different tolerances can be selected by description within a profile
  • Technical data
  • Applications
  • Versions
  • Shipment

Resolution
In Z, relative to stylus tip: 0.38 µm (350 mm probe arm) / 0.19 µm (175 mm probe arm)
In Z, relative to measuring system: 0.04 µm
Sampling angle
on smooth surfaces, depending on deflection: trailing edges up to 88°, leading edges up to 77°
Start of traversing length (in X)
0.2 mm
Tip radius
25 µm
Contacting speed (in Z)
0.1 to 1 mm/s
Probe arm length
175 mm, 350 mm
End of traversing length (in X)
200 mm
Positioning speed
In X and return speed: 0.2 to 8 mm/s
In Z: 0.2 to 10 mm/s
Guide deviation
< 1 µm (over 200 mm)
Measuring speed
0.2 mm/s to 4 mm/s
Measuring range mm
(in Z) 50 mm
Traversing lengths
0.2 mm to 200 mm
Measuring force (N)
1 mN to 120 mN, below and above (can be set in MarSurf XC 20)


SẢN PHẨM CÙNG DANH MỤC