- The device ISG-N137 is equipped with microprocessor-based technology. It is equipped with features that normally can only be found in automatic or multiplex amplifiers. Every error caused by transmitter and receiver wiring is reported immediately by the permanent sensor-control. An included time delay offers, for example, the gating of short interruptions of a light barrier or a pulse stretching. Switch-on and switch-off delay time can be activated simultaneously. The 4-fold frequency change-over is useful to decouple nearby light barriers. Two level settings allow an adjustment to be made to compensate for distance and for different operating conditions. By the use of dark switching, it is possible to reverse the switching behavior of the output. The alarm output indicates sensor errors as well as decreased visual contact caused by contamination or misalignment. Wear-free transistor outputs ensure high switching sequences and reliable continuous operation.
- Single channel opto sensor
- Detection range up to 55 m (180 ft)
- Manual sensitivity setting
- Permanent sensor-control
- Transistor output NPN / PNP
- Alarm output
- On/off delay timer
- 4 frequency settings
- 2 level settings
- Light/dark switching
Thông số kỹ thuật
- Number of channels : 1
- Range (using transmitter ITL combined with receiver IRL / IRH) : 10 m / 20 m (33 ft / 66 ft)
- Range (using transmitter ITH combined with receiver IRL / IRH) : 20 m / 35 m (66 ft / 115 ft)
- Range (using transmitter ITA combined with receiver IRL / IRH) : 35 m / 55 m (115 ft / 180 ft)
- Switching frequencies : 50 Hz /10 Hz
- Power consumption : 5 VA
- Switching output : Transistor PNP / NPN 100 mA, 30 V DC
- Alarm output, DC-supply : PNP / NPN 100 mA, 30 V DC
- Alarm output, AC-supply : NPN 100 mA, 30 V DC
- Delay time : 0...10 s
- Connection : 11-pin DIN-plug
- Supply voltage : 230 V AC / 115 V AC / 24 V AC / 24 V DC