JVL are now ready to reveal a prototype of our new QuickStep® integrated stepper motor in
NEMA43 with RS485 programmable motion controller and optional industrial Ethernet, wireless
and absolute multiturn encoder. The motor is very useful in applications where motors must be
very compact, have very high torque at low speed and without backlash as a normal gear
would offer.
Shortest length in the industry only 146 mm for 10 Nm
• Extreme Resolution up to 409600 step/rev equal to 2048 microsteps per fullstep
• Velocity precision 0.01 RPM. Acceleration precision 1 RPM/sec.
• Built-in PLC with 8 I/O: each DI or DO 24V or 0-5V (12bit) analogue input with
advanced input filtering
• RS485 up to 2 Mbit and Modbus RTU
• Option: RS422 and RS485 for encoder I/O and connection to external HMI or PLC
• Point-to-point or multiaxis operation up to 254 axes on the same RS485 bus
• Pulse/Direction mode for electronic gearing
• Option built-in: CANbus with CANopen DSP402 and DS301
• Option built-in: Wireless LAN, Bluetooth or Zigbee.
• Option built-in: Industrial Ethernet EtherCAT, EtherNet/IP, Powerlink etc.
• Prepared for High speed position capture
• Wide Supply range from 12-80 VDC delivering high torque at high speeds
• Motor current 0-9 Amp RMS, 12.6 Amp Peak
• Dual supply maintain position values etc in emergency-stop situations
• ActiveX / OCX driver available as well as MacTalk protocol
• Powerful graphic programming with +-*/ calculations and advanced functions
• All connections with M12 connectors, IP67
• Option for double shaft and single or absolute multiturn encoder
Thông số kỹ thuật
>>> NEMA17 42mm ở Hà Nội