Product Highlights
Level detection, switch and control functions up to 18.0' (5.5m)
Configuration is fast and easy via WebCal software and USB adapter
Narrow 3" beam width and short 8" dead band optimized for small tanks
Four (4) programmable relays rated @ 1A / 60VA for switch, pump or valve control and fail-safety
PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
Automatic temperature compensation for accurate measurement
Range: 18.0' (5.5m)
Accuracy: ± 0.2% of range
Resolution: 0.079" (2mm)
Dead band: 8" (20cm)
Beam width: 3" (7.62cm)
Configuration: WebCal® PC Windows® USB 2.0
Memory: Non-volatile
Supply voltage: 24 VDC (loop)
Consumption: 0.5W
Loop resist.: 400O max
Signal output: 4-20 mA, two-wire
Signal invert: 4-20 mA or 20-4 mA
Signal fail-safe: 4 mA, 20 mA, 21 mA, 22 mA or hold last
Contact type: (4) SPST relays
Contact rating: 60 VA, 1A maximum
Contact fail-safe: Power loss: Hold last Echo loss: Open, close or hold last
Hysteresis: Selectable
Process temp.: F: 20° to 140°C: -7° to 60°
Temp. comp.: Automatic
Ambient temp.: F: -31° to 140°C: -35° to 60°
Pressure: MWP = 30 PSI (2 bar)
Enclosure rating: Type 6P, encapsulated, corrosion resistant & submersible
Encl. material: Polycarbonate
Trans. material: PVDF
Cable jacket mat: Polyurethane
Cable type: 9-conductor, shielded
Cable length: 48" (1.2m)
Process mount: 2" NPT (2" G)
Mount gasket: Viton®
Classification: General purpose
Compliance: CE, RoHS
Approvals: cFMus