The ET125 can be used to record the conductivity of a solution flowing through tubing with an outer diameter of 1/16 inch (1.6mm). Installation is easy as the customer’s tubing is simply slid into the headstage. It must be connected to either the ER225, ER815 or ER825 hardware units.
The sample doesn't come into contact with the detector electrodes so it is easy to analyse hazardous, corrosive or radioactive liquids. There is no carryover or memory effect from the previous sample. There is no electrode deterioration or polarization.
The ET125 can record conductivities between 20 µS/cm and 200 mS/cm, depending on the inner diameter of the tubing being used. It can be used with many tubing materials, including PEEK and PTFE (Teflon) etc.
Thông số kỹ thuật
20 µS/cm to 2 mS/cm when using tubing with 500 µm internal diameter.
200 µS/cm to 20 mS/cm when using tubing with 250 µm internal diameter.
2 mS/cm to 200 mS/cm when using tubing with 125 µm internal diameter.
>>> PowerChrom chính hãng ở Hà Nội