Linearized and temperature-compensated measuring ranges
Measuring principle: aluminum oxide ceramic thick-film sensor
Measuring ranges: 0 to 1.6 bar up to 0 to 100 bar relative pressure
Elastomer-sealed
Temperature of medium: -20 to +85 °C
Measured values transmitted in any units to the CANopen bus
Protection type: IP67
The measuring range monitoring has a choice of upper and lower limits. The result is output as a status byte along with the measured value in the PDO telegram.
The drag indicator function saves the minimum and maximum pressure measured values.
The date and name of the last maintenance operation can be saved.
The emergency telegram is triggered in the event of a sensor fault.
The sensor monitoring continuously checks that the sensor signal function is correct and triggers high-priority emergency telegrams in the event of an error.
The pressure measured value can be scaled to any desired measuring units (or as a percentage of the measuring range).
The fine adjustment features an auto-zero function and a freely adjustable characteristic line offset.
Undesired signal fluctuations can be suppressed using the adjustable filter constant.
The measured value is output with a choice of decimal place.
The PDO telegram contains the 32-bit measured value and the 8-bit status. The measured value output can be controlled through various trigger conditions.
SDO telegrams can be used to set parameters and to request measured values and statuses.
The heartbeat signal or node guarding can also be used to monitor the transmitter function.
The sync command can be used to also control measured value transmission.
The NMT telegrams are used to control the operating status of the transmitter.
The CAN module ID and the CAN baud rate are set either with LSS or SDO.
>>> Cảm biến đo áp suất Pressure and Differential Pressure Transmitter Jumo